Fixed
Status Update
Comments
su...@google.com <su...@google.com> #2
Thanks for filing the issue.
This is a particularly hard device to come by - do you happen to have access to the device? If so could you provide us with the output of: adb shell dumpsys media.camera > info.txt
Thanks!
This is a particularly hard device to come by - do you happen to have access to the device? If so could you provide us with the output of: adb shell dumpsys media.camera > info.txt
Thanks!
dr...@gmail.com <dr...@gmail.com> #3
Similar stacktrace reported to the email group
Stacktrace:
Caused by: java.lang.IllegalArgumentException: Can not get supported output size under supported maximum for the format: 34
at androidx.camera.camera2.internal.SupportedSurfaceCombination.getSupportedOutputSizes(SupportedSurfaceCombination.java:355)
at androidx.camera.camera2.internal.SupportedSurfaceCombination.getSuggestedResolutions(SupportedSurfaceCombination.java:197)
at androidx.camera.camera2.internal.Camera2DeviceSurfaceManager.getSuggestedResolutions(Camera2DeviceSurfaceManager.java:198)
at androidx.camera.core.CameraX.calculateSuggestedResolutions(CameraX.java:943)
at androidx.camera.core.CameraX.bindToLifecycle(CameraX.java:293)
at androidx.camera.lifecycle.ProcessCameraProvider.bindToLifecycle(ProcessCameraProvider.java:227)
Below are some findings based on our debugging
When Dex is connected
previewConfig.getMaxResolution() is returning "731x411" as maxSize.
Inside Preview.Builder.build() -> Default_MAX_resolution is set to "CameraX.getSurfaceManager().getPreviewSize()" which is 731x411
this is being picked as maxSize.
While rendering maxSize is 731x411 and minSize is 640x480 and below are available outputSizes
0 = {Size@11860} "4032x3024"
1 = {Size@11861} "3984x2988"
2 = {Size@11862} "4032x2268"
3 = {Size@11863} "3024x3024"
4 = {Size@11864} "2976x2976"
5 = {Size@11865} "3840x2160"
6 = {Size@11866} "3264x2448"
7 = {Size@11867} "4032x1960"
8 = {Size@11868} "2880x2160"
9 = {Size@11869} "3264x1836"
10 = {Size@11870} "2160x2160"
11 = {Size@11871} "2560x1440"
12 = {Size@11872} "2224x1080"
13 = {Size@11873} "2048x1152"
14 = {Size@11874} "1920x1080"
15 = {Size@11875} "1440x1080"
16 = {Size@11876} "1088x1088"
17 = {Size@11877} "1280x720"
18 = {Size@11878} "1024x768"
19 = {Size@11879} "1056x704"
20 = {Size@11880} "960x720"
21 = {Size@11881} "960x540"
22 = {Size@11882} "720x720"
23 = {Size@11883} "800x450"
24 = {Size@11884} "720x480"
25 = {Size@11885} "640x480"
26 = {Size@11886} "352x288"
27 = {Size@11887} "320x240"
28 = {Size@11888} "256x144"
29 = {Size@11889} "176x144"
and couldn't find any size in this range.
When Dex not connected
minsize = 640x480
maxsize = 1920x1080
0 = {Size@11836} "4032x3024"
1 = {Size@11837} "3984x2988"
2 = {Size@11838} "4032x2268"
3 = {Size@11839} "3024x3024"
4 = {Size@11840} "2976x2976"
5 = {Size@11841} "3840x2160"
6 = {Size@11842} "3264x2448"
7 = {Size@11843} "4032x1960"
8 = {Size@11844} "2880x2160"
9 = {Size@11845} "3264x1836"
10 = {Size@11846} "2160x2160"
11 = {Size@11847} "2560x1440"
12 = {Size@11848} "2224x1080"
13 = {Size@11849} "2048x1152"
14 = {Size@11850} "1920x1080"
15 = {Size@11851} "1440x1080"
16 = {Size@11852} "1088x1088"
17 = {Size@11853} "1280x720"
18 = {Size@11854} "1024x768"
19 = {Size@11855} "1056x704"
20 = {Size@11856} "960x720"
21 = {Size@11857} "960x540"
22 = {Size@11858} "720x720"
23 = {Size@11859} "800x450"
24 = {Size@11860} "720x480"
25 = {Size@11861} "640x480"
26 = {Size@11862} "352x288"
27 = {Size@11863} "320x240"
28 = {Size@11864} "256x144"
29 = {Size@11865} "176x144"
and we have 12 available sizes in this range
Camera2DeviceSurfaceManager.java:: getPreviewSize()
mCameraSupportedSurfaceCombinationMap.get(cameraId).getSurfaceDefinition().getPreviewSize() = "1920x1080"
cameraId=0
Stacktrace:
Caused by: java.lang.IllegalArgumentException: Can not get supported output size under supported maximum for the format: 34
at androidx.camera.camera2.internal.SupportedSurfaceCombination.getSupportedOutputSizes(SupportedSurfaceCombination.java:355)
at androidx.camera.camera2.internal.SupportedSurfaceCombination.getSuggestedResolutions(SupportedSurfaceCombination.java:197)
at androidx.camera.camera2.internal.Camera2DeviceSurfaceManager.getSuggestedResolutions(Camera2DeviceSurfaceManager.java:198)
at androidx.camera.core.CameraX.calculateSuggestedResolutions(CameraX.java:943)
at androidx.camera.core.CameraX.bindToLifecycle(CameraX.java:293)
at androidx.camera.lifecycle.ProcessCameraProvider.bindToLifecycle(ProcessCameraProvider.java:227)
Below are some findings based on our debugging
When Dex is connected
previewConfig.getMaxResolution() is returning "731x411" as maxSize.
Inside Preview.Builder.build() -> Default_MAX_resolution is set to "CameraX.getSurfaceManager().getPreviewSize()" which is 731x411
this is being picked as maxSize.
While rendering maxSize is 731x411 and minSize is 640x480 and below are available outputSizes
0 = {Size@11860} "4032x3024"
1 = {Size@11861} "3984x2988"
2 = {Size@11862} "4032x2268"
3 = {Size@11863} "3024x3024"
4 = {Size@11864} "2976x2976"
5 = {Size@11865} "3840x2160"
6 = {Size@11866} "3264x2448"
7 = {Size@11867} "4032x1960"
8 = {Size@11868} "2880x2160"
9 = {Size@11869} "3264x1836"
10 = {Size@11870} "2160x2160"
11 = {Size@11871} "2560x1440"
12 = {Size@11872} "2224x1080"
13 = {Size@11873} "2048x1152"
14 = {Size@11874} "1920x1080"
15 = {Size@11875} "1440x1080"
16 = {Size@11876} "1088x1088"
17 = {Size@11877} "1280x720"
18 = {Size@11878} "1024x768"
19 = {Size@11879} "1056x704"
20 = {Size@11880} "960x720"
21 = {Size@11881} "960x540"
22 = {Size@11882} "720x720"
23 = {Size@11883} "800x450"
24 = {Size@11884} "720x480"
25 = {Size@11885} "640x480"
26 = {Size@11886} "352x288"
27 = {Size@11887} "320x240"
28 = {Size@11888} "256x144"
29 = {Size@11889} "176x144"
and couldn't find any size in this range.
When Dex not connected
minsize = 640x480
maxsize = 1920x1080
0 = {Size@11836} "4032x3024"
1 = {Size@11837} "3984x2988"
2 = {Size@11838} "4032x2268"
3 = {Size@11839} "3024x3024"
4 = {Size@11840} "2976x2976"
5 = {Size@11841} "3840x2160"
6 = {Size@11842} "3264x2448"
7 = {Size@11843} "4032x1960"
8 = {Size@11844} "2880x2160"
9 = {Size@11845} "3264x1836"
10 = {Size@11846} "2160x2160"
11 = {Size@11847} "2560x1440"
12 = {Size@11848} "2224x1080"
13 = {Size@11849} "2048x1152"
14 = {Size@11850} "1920x1080"
15 = {Size@11851} "1440x1080"
16 = {Size@11852} "1088x1088"
17 = {Size@11853} "1280x720"
18 = {Size@11854} "1024x768"
19 = {Size@11855} "1056x704"
20 = {Size@11856} "960x720"
21 = {Size@11857} "960x540"
22 = {Size@11858} "720x720"
23 = {Size@11859} "800x450"
24 = {Size@11860} "720x480"
25 = {Size@11861} "640x480"
26 = {Size@11862} "352x288"
27 = {Size@11863} "320x240"
28 = {Size@11864} "256x144"
29 = {Size@11865} "176x144"
and we have 12 available sizes in this range
Camera2DeviceSurfaceManager.java:: getPreviewSize()
mCameraSupportedSurfaceCombinationMap.get(cameraId).getSurfaceDefinition().getPreviewSize() = "1920x1080"
cameraId=0
ra...@google.com <ra...@google.com> #4
Hi virifi129,
The issue root cause is that CameraX will default filter out sizes smaller than 640x480. For Preview, the max size will be limited to under display size. I checked the HW spec info for the issue related devices. Display size of FUJITSU F-04J/F-05J is 360x640. That will result int that no size exists in the conditions that is larger or equal to 640x480 and smaller or equal to 360x640.
A temporary workaround for this situation is to use Preview.Builder#setTargetResolution() to set a size smaller than 640x480 to bypass the problem.
For device FUJITSU arrowsM04, I checked its HW spec info and its display size I found is 1280x720. It seems that the problem should not exist in the device.
Could you confirm that the problem exist on arrowsM04 device? What will be the returned value when using Display#getRealSize to obtain the display size?
The issue root cause is that CameraX will default filter out sizes smaller than 640x480. For Preview, the max size will be limited to under display size. I checked the HW spec info for the issue related devices. Display size of FUJITSU F-04J/F-05J is 360x640. That will result int that no size exists in the conditions that is larger or equal to 640x480 and smaller or equal to 360x640.
A temporary workaround for this situation is to use Preview.Builder#setTargetResolution() to set a size smaller than 640x480 to bypass the problem.
For device FUJITSU arrowsM04, I checked its HW spec info and its display size I found is 1280x720. It seems that the problem should not exist in the device.
Could you confirm that the problem exist on arrowsM04 device? What will be the returned value when using Display#getRealSize to obtain the display size?
dr...@gmail.com <dr...@gmail.com> #5
Sorry for the late reply.
> A temporary workaround for this situation is to use Preview.Builder#setTargetResolution() to set a size smaller than 640x480 to bypass the problem.
OK. I will try it.
> Could you confirm that the problem exist on arrowsM04 device?
We receive the crash report (Crashlytics) that this crash has occurred on arrowsM04.
We don't have this device so we can't confirm that the problem really exist on arrowsM04.
> What will be the returned value when using Display#getRealSize to obtain the display size?
We can't investigate it for the same reason.
Thank you.
> A temporary workaround for this situation is to use Preview.Builder#setTargetResolution() to set a size smaller than 640x480 to bypass the problem.
OK. I will try it.
> Could you confirm that the problem exist on arrowsM04 device?
We receive the crash report (Crashlytics) that this crash has occurred on arrowsM04.
We don't have this device so we can't confirm that the problem really exist on arrowsM04.
> What will be the returned value when using Display#getRealSize to obtain the display size?
We can't investigate it for the same reason.
Thank you.
ra...@google.com <ra...@google.com> #6
Root cause:
This issue happened on devices that the display size is smaller than 640x480. In original auto-resolution mechanism, supported sizes smaller than 640x480 will be default filter out.
The auto-resolution mechanism encodes the guaranteed configurations tables in CameraDevice#createCaptureSession(SessionConfiguration). It defines that the PREVIEW size is the small one of the device display size and 1080p. The PREVIEW size will be the maximal size limitation for Preview use case. The reason it limits the size to display size and 1080p is the stream output in display size or 1080p has been able to provide good enough preview quality. Therefore, auto-resolution mechanism will limit the selected size to be smaller than the small one of the device display size and 1080p.
With above two conditions, in this issue, all sizes smaller than 640x480 have been filter out, therefore, there is no size smaller than the display size 320x240 can be selected to use. And cause the exception.
Solution:
When the display size is smaller than 640x480, auto-resolution mechanism won't filter out those small sizes smaller than 640x480. This makes those small size be left and can be selected for the Preview use case on small display devices.
The solution has been merged and will be included in next CameraX release.
This issue happened on devices that the display size is smaller than 640x480. In original auto-resolution mechanism, supported sizes smaller than 640x480 will be default filter out.
The auto-resolution mechanism encodes the guaranteed configurations tables in CameraDevice#createCaptureSession(SessionConfiguration). It defines that the PREVIEW size is the small one of the device display size and 1080p. The PREVIEW size will be the maximal size limitation for Preview use case. The reason it limits the size to display size and 1080p is the stream output in display size or 1080p has been able to provide good enough preview quality. Therefore, auto-resolution mechanism will limit the selected size to be smaller than the small one of the device display size and 1080p.
With above two conditions, in this issue, all sizes smaller than 640x480 have been filter out, therefore, there is no size smaller than the display size 320x240 can be selected to use. And cause the exception.
Solution:
When the display size is smaller than 640x480, auto-resolution mechanism won't filter out those small sizes smaller than 640x480. This makes those small size be left and can be selected for the Preview use case on small display devices.
The solution has been merged and will be included in next CameraX release.
dr...@gmail.com <dr...@gmail.com> #7
Hello.
This crash still occurs.
- CAMERAX VERSION: 1.0.0-beta4
- ANDROID OS BUILD NUMBER: Android 7.1.1
- DEVICE NAME: FUJITSU F-02H
We receive following crash report from FUJITSU F-02H. So far We have received this crash report only from F-02H.
java.lang.IllegalArgumentException
Can not get supported output size under supported maximum for the format: 34
androidx.camera.camera2.internal.SupportedSurfaceCombination.getSupportedOutputSizes (SupportedSurfaceCombination.java:349)
androidx.camera.camera2.internal.SupportedSurfaceCombination.getSuggestedResolutions (SupportedSurfaceCombination.java:197)
androidx.camera.camera2.internal.Camera2DeviceSurfaceManager.getSuggestedResolutions (Camera2DeviceSurfaceManager.java:198)
androidx.camera.core.CameraX.calculateSuggestedResolutions (CameraX.java:949)
androidx.camera.core.CameraX.bindToLifecycle (CameraX.java:351)
androidx.camera.lifecycle.ProcessCameraProvider.bindToLifecycle (ProcessCameraProvider.java:230)
(our application's package name).CameraFragment.bindCameraUseCases (CameraFragment.java:174)
ra...@google.com <ra...@google.com> #8
Hi virifi129,
Could you help to provide the following information to clarify the issue?
1. Is the full name of the device Fujitsu Arrows NX F-02H that has a 1440x2560 display?
2. Please help to provide the supported output sizes of ImageFormat.PRIVATE that is obtained by StreamConfigurationMap#getOutputSizes(int).
Could you help to provide the following information to clarify the issue?
1. Is the full name of the device Fujitsu Arrows NX F-02H that has a 1440x2560 display?
2. Please help to provide the supported output sizes of ImageFormat.PRIVATE that is obtained by StreamConfigurationMap#getOutputSizes(int).
dr...@gmail.com <dr...@gmail.com> #9
- Is the full name of the device Fujitsu Arrows NX F-02H that has a 1440x2560 display?
Yes
- Please help to provide the supported output sizes of ImageFormat.PRIVATE that is obtained by StreamConfigurationMap#getOutputSizes(int).
Since we don't have this device, we'll try to collect this information in the next version of our app. The next version will be released later this month.
ra...@google.com <ra...@google.com> #10
Hello.
- Please help to provide the supported output sizes of ImageFormat.PRIVATE that is obtained by StreamConfigurationMap#getOutputSizes(int).
We have collected the output of the device where the crash occurs.
Device1
- Model : arrows Be F-05J
- Android Version : 7.1.1
- Supported output sizes of ImageFormat.PRIVATE
CameraId 0: 480x480
CameraId 1: 2048x1536 ,1920x1080 ,1280x720 ,960x720 ,640x480 ,320x240 ,176x144
Device2
- Model : Fujitsu arrows M04
- Android Version : 7.1.1
- Supported output sizes of ImageFormat.PRIVATE
CameraId 0: 480x480
CameraId 1: 2048x1536 ,1920x1080 ,1280x720 ,960x720 ,640x480 ,320x240 ,176x144
Additional Information
CameraX version : 1.0.0-beta04
We collect the supported output sizes by following code.
val errorString = buildString {
append("The supported output sizes of ImageFormat.PRIVATE: ")
(requireContext().getSystemService(Context.CAMERA_SERVICE) as CameraManager).apply {
cameraIdList.forEachIndexed { index, cameraId ->
val msg = if (VERSION.SDK_INT >= VERSION_CODES.M) {
val configurationMap =
getCameraCharacteristics(cameraId).get(CameraCharacteristics.SCALER_STREAM_CONFIGURATION_MAP)
val sizes = configurationMap?.getOutputSizes(ImageFormat.PRIVATE)
"CameraId $index: ${sizes?.joinToString(" ,")}"
} else {
"CameraId $index: This device version is under M."
}
append(msg)
}
}
}
Description
When I set up a periodic job, I want the first in the series to be performed INSTANTLY (the user expects it... they hit a button and are waiting for an immediate result), and then for subsequent ones to be performed based on the periodic schedule (more vague timings is fine... the user is no longer waiting).
When you set up a periodic work request *without* a flex interval, it can run anytime in the set interval, i.e. from NOW until the end of the interval. If the device is awake when the periodic work request is scheduled, which is the case for me, I find that the first work in the series is generally performed at the START of the interval, i.e. NOW... though "NOW" may not be instantly (it's up to the device to decide... may be delayed a few seconds).
Because it cannot be guaranteed that the first periodic work will be performed *instantly*, instead I do an explicit call to the work-performing function outside of the WorkManager realm, and put a flexInterval on the periodic work of 5 mins so that the first periodic work will certainly not be performed straight away, but instead it will be near the end of the first period, most likely 5 mins before the end. This is not quite ideal (first gap between work runs is not quite a full interval) but it's OK... the user won't care or even notice it runs 5 mins "early" the first time.
Now, I thought that the ability to set an "initialDelay" in 2.1.0 would solve my problems... so that I could:
(a) still make an explicit call to the work-performing function to do the immediate work, guaranteed to be NOW (the user expects that)
(b) set up a periodic work request WITHOUT flexInterval (i.e. use the whole interval) and WITH an initial delay equal to the period "interval"
That way, I get the immediate work done, and then after "interval" the periodic work request is scheduled, and because (let's assume) the device is still awake, the first periodic work will likely perform at the START of the interval, i.e. almost straight away, i.e. pretty close to exactly one "interval" after the user set the schedule going.
BUT I'm not finding that. Let's say that "interval" of the periodic work is 15 mins, and I set an "initial delay" also of 15 mins, and I set this going when the user hits the button. I find that the immediate work is performed at 0 mins (triggered explicitly, not by WorkManager, so that's as expected), then at 15 mins NOTHING happens, and only at 30 mins does the first periodic work actually run.
It seems that either the first periodic work happens at the END of the first interval (15-30 mins) and not the start (like it usually does, if the device is awake and not busy), or WorkManager delayed first periodic interval to be at 30-45 mins, i.e. it waited 30 mins not 15 mins, twice what I asked for.
So, how is "setInitialDelay" for a periodic work request meant to work? It doesn't just wait "delay" (instead of not waiting at all) and then enqueue the periodic work request?