crosh> dmesg [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [ 0.000000] Linux version 5.10.180-22631-gc8e37fc5f0ab (chrome-bot@chromeos-release-builder-us-central1-b-x32-66-okmh) (Chromium OS 17.0_pre496208_p20230501-r6 clang version 17.0.0 (/mnt/host/source/src/third_party/llvm-project 98f5a340975bc00197c57e39eb4ca26e2da0e8a2), LLD 17.0.0) #1 SMP PREEMPT Wed Jul 26 19:01:55 PDT 2023 [ 0.000000] random: crng init done [ 0.000000] Machine model: MediaTek krane sku176 board [ 0.000000] Malformed early option 'console' [ 0.000000] Reserved memory: created DMA memory pool at 0x0000000050000000, size 41 MiB [ 0.000000] OF: reserved mem: initialized node scp_mem_region, compatible id shared-dma-pool [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000040000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000013fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000040000000-0x000000004fffffff] [ 0.000000] node 0: [mem 0x0000000050000000-0x00000000528fffff] [ 0.000000] node 0: [mem 0x0000000052900000-0x00000000545fffff] [ 0.000000] node 0: [mem 0x0000000054700000-0x00000000ffdfffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000013fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000013fffffff] [ 0.000000] On node 0 totalpages: 1047808 [ 0.000000] DMA zone: 12288 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 785664 pages, LIFO batch:63 [ 0.000000] Normal zone: 4096 pages used for memmap [ 0.000000] Normal zone: 262144 pages, LIFO batch:63 [ 0.000000] On node 0, zone DMA: 256 pages in unavailable ranges [ 0.000000] On node 0, zone Normal: 512 pages in unavailable ranges [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s93336 r8192 d29544 u131072 [ 0.000000] pcpu-alloc: s93336 r8192 d29544 u131072 alloc=32*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: detected: ARM erratum 845719 [ 0.000000] CPU features: detected: GIC system register CPU interface [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1031424 [ 0.000000] Kernel command line: cros_secure console= loglevel=7 init=/sbin/init cros_secure drm.trace=0x106 root=/dev/dm-0 rootwait ro dm_verity.error_behavior=3 dm_verity.max_bios=-1 dm_verity.dev_wait=1 dm="1 vroot none ro 1,0 6144000 verity payload=PARTUUID=6054c8b5-2c17-4e3e-9f5f-bc2a96bf764b/PARTNROFF=1 hashtree=PARTUUID=6054c8b5-2c17-4e3e-9f5f-bc2a96bf764b/PARTNROFF=1 hashstart=6144000 alg=sha256 root_hexdigest=8e442d4eb6f01e3bd21b5b42ede889cd67a316fd949cf05b380e2142181e440f salt=23867f54c1aa0a406880edb52304b63453d25a71950b6d213fce0b11185a03fb" noinitrd vt.global_cursor_default=0 kern_guid=6054c8b5-2c17-4e3e-9f5f-bc2a96bf764b cpuidle.governor=teo [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000fbe00000-0x00000000ffe00000] (64MB) [ 0.000000] Memory: 3977196K/4191232K available (12222K kernel code, 2488K rwdata, 5172K rodata, 1408K init, 1073K bss, 214036K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] ftrace: allocating 42899 entries in 168 pages [ 0.000000] ftrace: allocated 168 pages with 3 groups [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [ 0.000000] GICv3: 640 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] GICv3: Distributor has no Range Selector support [ 0.000000] GICv3: 16 PPIs implemented [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x000000000c100000 [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] } [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] /cpus/cpu@102[6] /cpus/cpu@103[7] } [ 0.000000] rcu: Offload RCU callbacks from CPUs: 0-7. [ 0.000000] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) [ 0.000000] arch_timer: cp15 timer(s) running at 13.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2ff89eacb, max_idle_ns: 440795202429 ns [ 0.000002] sched_clock: 56 bits at 13MHz, resolution 76ns, wraps every 4398046511101ns [ 0.000374] Calibrating delay loop (skipped), value calculated using timer frequency.. 26.00 BogoMIPS (lpj=13000) [ 0.000382] pid_max: default: 32768 minimum: 301 [ 0.000466] LSM: Security Framework initializing [ 0.000497] landlock: Up and running. [ 0.000501] Yama: becoming mindful. [ 0.000518] LoadPin: ready to pin (currently enforcing) [ 0.000537] Chromium OS LSM: enabled [ 0.000540] SELinux: Initializing. [ 0.000616] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.000630] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.002045] rcu: Hierarchical SRCU implementation. [ 0.002782] smp: Bringing up secondary CPUs ... [ 0.003478] Detected VIPT I-cache on CPU1 [ 0.003500] GICv3: CPU1: found redistributor 1 region 0:0x000000000c120000 [ 0.003532] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [ 0.004153] Detected VIPT I-cache on CPU2 [ 0.004165] GICv3: CPU2: found redistributor 2 region 0:0x000000000c140000 [ 0.004177] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] [ 0.004751] Detected VIPT I-cache on CPU3 [ 0.004760] GICv3: CPU3: found redistributor 3 region 0:0x000000000c160000 [ 0.004772] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] [ 0.005560] CPU features: detected: ARM erratum 858921 [ 0.005567] CPU features: detected: Spectre-v2 [ 0.005574] CPU features: detected: Spectre-BHB [ 0.005577] Detected VIPT I-cache on CPU4 [ 0.005593] GICv3: CPU4: found redistributor 100 region 0:0x000000000c180000 [ 0.005599] arch_timer: Enabling local workaround for ARM erratum 858921 [ 0.005608] arch_timer: CPU4: Trapping CNTVCT access [ 0.005617] CPU4: Booted secondary processor 0x0000000100 [0x410fd092] [ 0.006259] Detected VIPT I-cache on CPU5 [ 0.006271] GICv3: CPU5: found redistributor 101 region 0:0x000000000c1a0000 [ 0.006277] arch_timer: Enabling local workaround for ARM erratum 858921 [ 0.006282] arch_timer: CPU5: Trapping CNTVCT access [ 0.006289] CPU5: Booted secondary processor 0x0000000101 [0x410fd092] [ 0.006958] Detected VIPT I-cache on CPU6 [ 0.006971] GICv3: CPU6: found redistributor 102 region 0:0x000000000c1c0000 [ 0.006976] arch_timer: Enabling local workaround for ARM erratum 858921 [ 0.006982] arch_timer: CPU6: Trapping CNTVCT access [ 0.006989] CPU6: Booted secondary processor 0x0000000102 [0x410fd092] [ 0.007559] Detected VIPT I-cache on CPU7 [ 0.007572] GICv3: CPU7: found redistributor 103 region 0:0x000000000c1e0000 [ 0.007578] arch_timer: Enabling local workaround for ARM erratum 858921 [ 0.007583] arch_timer: CPU7: Trapping CNTVCT access [ 0.007590] CPU7: Booted secondary processor 0x0000000103 [0x410fd092] [ 0.007659] smp: Brought up 1 node, 8 CPUs [ 0.007702] SMP: Total of 8 processors activated. [ 0.007707] CPU features: detected: 32-bit EL0 Support [ 0.007711] CPU features: detected: CRC32 instructions [ 0.007716] CPU features: detected: 32-bit EL1 Support [ 0.007842] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching [ 0.019672] CPU: All CPU(s) started at EL2 [ 0.019702] alternatives: patching kernel code [ 0.020887] devtmpfs: initialized [ 0.026511] Registered cp15_barrier emulation handler [ 0.026523] Registered setend emulation handler [ 0.026531] KASLR enabled [ 0.026665] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.026692] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.026869] pinctrl core: initialized pinctrl subsystem [ 0.027237] NET: Registered protocol family 16 [ 0.027922] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations [ 0.028127] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.028328] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.028351] audit: initializing netlink subsys (disabled) [ 0.028518] audit: type=2000 audit(0.028:1): state=initialized audit_enabled=0 res=1 [ 0.028720] thermal_sys: Registered thermal governor 'step_wise' [ 0.028723] thermal_sys: Registered thermal governor 'user_space' [ 0.028728] thermal_sys: Registered thermal governor 'power_allocator' [ 0.029202] thermal thermal_zone7: power_allocator: sustainable_power will be estimated [ 0.029249] thermal thermal_zone8: power_allocator: sustainable_power will be estimated [ 0.029342] cpuidle: using governor ladder [ 0.029458] cpuidle: using governor menu [ 0.029473] cpuidle: using governor teo [ 0.029652] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.029760] ASID allocator initialised with 32768 entries [ 0.030817] printk: console [ramoops-1] enabled [ 0.030938] pstore: Registered ramoops as persistent store backend [ 0.030944] ramoops: using 0x100000@0xffedb000, ecc: 0 [ 0.083397] gpiochip_find_base: found new base at 320 [ 0.083433] gpio gpiochip0: (pinctrl_paris): created GPIO range 0->191 ==> 10005000.pinctrl PIN 0->191 [ 0.083680] gpio gpiochip0: (pinctrl_paris): added GPIO chardev (254:0) [ 0.083717] gpio gpiochip0: registered GPIOs 320 to 511 on pinctrl_paris [ 0.091649] cryptd: max_cpu_qlen set to 1000 [ 0.093207] reg-fixed-voltage regulator0: GPIO lookup for consumer (null) [ 0.093213] reg-fixed-voltage regulator0: using device tree for GPIO lookup [ 0.093229] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator0[0]' [ 0.093247] of_get_named_gpiod_flags: parsed 'gpio' property of node '/regulator0[0]' - status (0) [ 0.093266] gpio gpiochip0: Persistence not supported for GPIO 178 [ 0.093395] reg-fixed-voltage regulator1: GPIO lookup for consumer (null) [ 0.093399] reg-fixed-voltage regulator1: using device tree for GPIO lookup [ 0.093407] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator1[0]' [ 0.093415] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator1[0]' [ 0.093420] reg-fixed-voltage regulator1: using lookup tables for GPIO lookup [ 0.093424] reg-fixed-voltage regulator1: No GPIO consumer (null) found [ 0.093533] reg-fixed-voltage regulator2: GPIO lookup for consumer (null) [ 0.093537] reg-fixed-voltage regulator2: using device tree for GPIO lookup [ 0.093545] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator2[0]' [ 0.093552] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator2[0]' [ 0.093556] reg-fixed-voltage regulator2: using lookup tables for GPIO lookup [ 0.093559] reg-fixed-voltage regulator2: No GPIO consumer (null) found [ 0.093653] reg-fixed-voltage regulator3: GPIO lookup for consumer (null) [ 0.093656] reg-fixed-voltage regulator3: using device tree for GPIO lookup [ 0.093667] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator3[0]' [ 0.093675] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator3[0]' [ 0.093679] reg-fixed-voltage regulator3: using lookup tables for GPIO lookup [ 0.093682] reg-fixed-voltage regulator3: No GPIO consumer (null) found [ 0.093776] reg-fixed-voltage regulator4: GPIO lookup for consumer (null) [ 0.093780] reg-fixed-voltage regulator4: using device tree for GPIO lookup [ 0.093787] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator4[0]' [ 0.093794] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator4[0]' [ 0.093798] reg-fixed-voltage regulator4: using lookup tables for GPIO lookup [ 0.093802] reg-fixed-voltage regulator4: No GPIO consumer (null) found [ 0.093910] reg-fixed-voltage regulator5: GPIO lookup for consumer (null) [ 0.093913] reg-fixed-voltage regulator5: using device tree for GPIO lookup [ 0.093921] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator5[0]' [ 0.093928] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator5[0]' [ 0.093932] reg-fixed-voltage regulator5: using lookup tables for GPIO lookup [ 0.093935] reg-fixed-voltage regulator5: No GPIO consumer (null) found [ 0.094028] reg-fixed-voltage regulator6: GPIO lookup for consumer (null) [ 0.094032] reg-fixed-voltage regulator6: using device tree for GPIO lookup [ 0.094039] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator6[0]' [ 0.094046] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator6[0]' [ 0.094049] reg-fixed-voltage regulator6: using lookup tables for GPIO lookup [ 0.094053] reg-fixed-voltage regulator6: No GPIO consumer (null) found [ 0.094223] reg-fixed-voltage ppvarn-lcd: GPIO lookup for consumer (null) [ 0.094227] reg-fixed-voltage ppvarn-lcd: using device tree for GPIO lookup [ 0.094235] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/ppvarn-lcd[0]' [ 0.094247] of_get_named_gpiod_flags: parsed 'gpio' property of node '/ppvarn-lcd[0]' - status (0) [ 0.094257] gpio gpiochip0: Persistence not supported for GPIO 66 [ 0.094431] reg-fixed-voltage ppvarp-lcd: GPIO lookup for consumer (null) [ 0.094435] reg-fixed-voltage ppvarp-lcd: using device tree for GPIO lookup [ 0.094448] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/ppvarp-lcd[0]' [ 0.094459] of_get_named_gpiod_flags: parsed 'gpio' property of node '/ppvarp-lcd[0]' - status (0) [ 0.094467] gpio gpiochip0: Persistence not supported for GPIO 166 [ 0.094619] reg-fixed-voltage pp1800-lcd: GPIO lookup for consumer (null) [ 0.094623] reg-fixed-voltage pp1800-lcd: using device tree for GPIO lookup [ 0.094634] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/pp1800-lcd[0]' [ 0.094645] of_get_named_gpiod_flags: parsed 'gpio' property of node '/pp1800-lcd[0]' - status (0) [ 0.094653] gpio gpiochip0: Persistence not supported for GPIO 36 [ 0.094983] iommu: Default domain type: Translated [ 0.095125] vgaarb: loaded [ 0.095426] SCSI subsystem initialized [ 0.095513] usbcore: registered new interface driver usbfs [ 0.095537] usbcore: registered new interface driver hub [ 0.095557] usbcore: registered new device driver usb [ 0.095588] mc: Linux media interface: v0.10 [ 0.095603] videodev: Linux video capture interface: v2.00 [ 0.096710] mediatek,efuse 8000000.soc_data: GPIO lookup for consumer wp [ 0.096715] mediatek,efuse 8000000.soc_data: using device tree for GPIO lookup [ 0.096727] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/soc/soc_data@8000000[0]' [ 0.096736] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/soc/soc_data@8000000[0]' [ 0.096743] mediatek,efuse 8000000.soc_data: using lookup tables for GPIO lookup [ 0.096747] mediatek,efuse 8000000.soc_data: No GPIO consumer wp found [ 0.096881] mediatek,efuse 11f10000.efuse: GPIO lookup for consumer wp [ 0.096885] mediatek,efuse 11f10000.efuse: using device tree for GPIO lookup [ 0.096895] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/soc/efuse@11f10000[0]' [ 0.096903] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/soc/efuse@11f10000[0]' [ 0.096908] mediatek,efuse 11f10000.efuse: using lookup tables for GPIO lookup [ 0.096911] mediatek,efuse 11f10000.efuse: No GPIO consumer wp found [ 0.097057] Advanced Linux Sound Architecture Driver Initialized. [ 0.097708] clocksource: Switched to clocksource arch_sys_counter [ 0.132189] VFS: Disk quotas dquot_6.6.0 [ 0.132243] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.133003] NET: Registered protocol family 2 [ 0.133132] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.134845] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) [ 0.134971] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.135152] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear) [ 0.135404] TCP: Hash tables configured (established 32768 bind 32768) [ 0.135503] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.135575] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.135748] NET: Registered protocol family 1 [ 0.135773] PCI: CLS 0 bytes, default 64 [ 0.136608] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available [ 0.136826] hw perfevents: enabled with armv8_cortex_a73 PMU driver, 7 counters available [ 0.137232] kvm [1]: IPA Size Limit: 40 bits [ 0.137715] kvm [1]: vgic-v2@c420000 [ 0.137732] kvm [1]: GIC system register CPU interface enabled [ 0.137856] kvm [1]: vgic interrupt IRQ18 [ 0.137997] kvm [1]: Hyp mode initialized successfully [ 0.141614] Initialise system trusted keyrings [ 0.141719] workingset: timestamp_bits=62 max_order=20 bucket_order=0 [ 0.144756] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.144939] Registering esdfs 0.2 [ 0.145044] alt_syscall: table 'read_write_test' available. [ 0.145067] alt_syscall: table 'android' available. [ 0.145087] alt_syscall: table 'android_permissive' available. [ 0.145110] alt_syscall: table 'third_party' available. [ 0.145127] alt_syscall: table 'third_party_permissive' available. [ 0.145142] alt_syscall: table 'complete' available. [ 0.145157] alt_syscall: table 'complete_permissive' available. [ 0.171301] Key type asymmetric registered [ 0.171310] Asymmetric key parser 'x509' registered [ 0.171343] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 0.171350] io scheduler mq-deadline registered [ 0.171356] io scheduler kyber registered [ 0.171425] io scheduler bfq registered [ 0.173554] pwm-backlight backlight_lcd0: GPIO lookup for consumer enable [ 0.173559] pwm-backlight backlight_lcd0: using device tree for GPIO lookup [ 0.173577] of_get_named_gpiod_flags: parsed 'enable-gpios' property of node '/backlight_lcd0[0]' - status (0) [ 0.173592] gpio gpiochip0: Persistence not supported for GPIO 176 [ 0.173595] gpio-496 (enable): no flags found for enable [ 0.173873] of_fixed_factor_clk: probe of fixed-factor-clock-13m failed with error -17 [ 0.186000] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.187107] mt6577-uart 11002000.serial: GPIO lookup for consumer rs485-term [ 0.187113] mt6577-uart 11002000.serial: using device tree for GPIO lookup [ 0.187127] of_get_named_gpiod_flags: can't parse 'rs485-term-gpios' property of node '/soc/serial@11002000[0]' [ 0.187137] of_get_named_gpiod_flags: can't parse 'rs485-term-gpio' property of node '/soc/serial@11002000[0]' [ 0.187143] mt6577-uart 11002000.serial: using lookup tables for GPIO lookup [ 0.187148] mt6577-uart 11002000.serial: No GPIO consumer rs485-term found [ 0.207269] 11002000.serial: ttyS0 at MMIO 0x11002000 (irq = 33, base_baud = 1625000) is a ST16650V2 [ 0.207947] mt6577-uart 11003000.serial: GPIO lookup for consumer rs485-term [ 0.207951] mt6577-uart 11003000.serial: using device tree for GPIO lookup [ 0.207961] of_get_named_gpiod_flags: can't parse 'rs485-term-gpios' property of node '/soc/serial@11003000[0]' [ 0.207970] of_get_named_gpiod_flags: can't parse 'rs485-term-gpio' property of node '/soc/serial@11003000[0]' [ 0.207975] mt6577-uart 11003000.serial: using lookup tables for GPIO lookup [ 0.207979] mt6577-uart 11003000.serial: No GPIO consumer rs485-term found [ 0.228145] 11003000.serial: ttyS1 at MMIO 0x11003000 (irq = 34, base_baud = 1625000) is a ST16650V2 [ 0.228255] serial serial0: tty port ttyS1 registered [ 0.248833] usbcore: registered new interface driver udl [ 0.251509] mediatek-drm mediatek-drm.1.auto: Adding component match for /soc/ovl@14008000 [ 0.251544] mediatek-drm mediatek-drm.1.auto: Adding component match for /soc/ovl@14009000 [ 0.251572] mediatek-drm mediatek-drm.1.auto: Adding component match for /soc/ovl@1400a000 [ 0.251597] mediatek-drm mediatek-drm.1.auto: Adding component match for /soc/rdma@1400b000 [ 0.251624] mediatek-drm mediatek-drm.1.auto: Adding component match for /soc/rdma@1400c000 [ 0.251658] mediatek-drm mediatek-drm.1.auto: Adding component match for /soc/color@1400e000 [ 0.251684] mediatek-drm mediatek-drm.1.auto: Adding component match for /soc/ccorr@1400f000 [ 0.251717] mediatek-drm mediatek-drm.1.auto: Adding component match for /soc/aal@14010000 [ 0.251744] mediatek-drm mediatek-drm.1.auto: Adding component match for /soc/gamma@14011000 [ 0.251819] mediatek-drm mediatek-drm.1.auto: Adding component match for /soc/dsi@14014000 [ 0.251848] mediatek-drm mediatek-drm.1.auto: Adding component match for /soc/dpi@14015000 [ 0.255200] mali 13040000.mali: Kernel DDK version r40p0-01eac0 [ 0.255211] mali 13040000.mali: IRQ JOB not found [ 0.255234] mali 13040000.mali: IRQ MMU not found [ 0.255247] mali 13040000.mali: IRQ GPU not found [ 0.255571] cacheinfo: Unable to detect cache hierarchy for CPU 0 [ 0.258423] loop: module loaded [ 0.258602] lkdtm: No crash points registered, enable through debugfs [ 0.268198] vsim1: Bringing 1800000uV into 2700000-2700000uV [ 0.279172] of_get_named_gpiod_flags: parsed 'cs-gpios' property of node '/soc/spi@1100a000[0]' - status (0) [ 0.281367] spi-nor spi1.0: w25q64dw (8192 Kbytes) [ 0.281474] mtd mtd0: GPIO lookup for consumer wp [ 0.281478] mtd mtd0: using device tree for GPIO lookup [ 0.281490] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/soc/spi@11010000/spi-flash@0[0]' [ 0.281498] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/soc/spi@11010000/spi-flash@0[0]' [ 0.281505] mtd mtd0: using lookup tables for GPIO lookup [ 0.281509] mtd mtd0: No GPIO consumer wp found [ 0.283565] mdio_bus fixed-0: GPIO lookup for consumer reset [ 0.283570] mdio_bus fixed-0: using lookup tables for GPIO lookup [ 0.283574] mdio_bus fixed-0: No GPIO consumer reset found [ 0.283588] PPP generic driver version 2.4.2 [ 0.283687] PPP MPPE Compression module registered [ 0.284422] mtu3 11201000.usb: uwk - reg:0x420, version:101 [ 0.284468] mtu3 11201000.usb: supply vbus not found, using dummy regulator [ 0.284524] mtu3 11201000.usb: dr_mode: 1, is_u3_dr: 0, u3p_dis_msk: 0, drd: auto [ 0.285512] mtu3 11201000.usb: xHCI platform device register success... [ 0.285721] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.285728] ehci-pci: EHCI PCI platform driver [ 0.285762] ehci-platform: EHCI generic platform driver [ 0.285903] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.285915] ohci-pci: OHCI PCI platform driver [ 0.285936] ohci-platform: OHCI generic platform driver [ 0.286104] tpm_tis_spi spi0.0: TPM ready IRQ confirmed on attempt 2 [ 0.286538] xhci-mtk 11200000.xhci: supply vbus not found, using dummy regulator [ 0.286835] xhci-mtk 11200000.xhci: xHCI Host Controller [ 0.286937] xhci-mtk 11200000.xhci: new USB bus registered, assigned bus number 1 [ 0.287014] xhci-mtk 11200000.xhci: hcc params 0x01400f99 hci version 0x110 quirks 0x0000000000210010 [ 0.287052] xhci-mtk 11200000.xhci: irq 291, io mem 0x11200000 [ 0.287130] xhci-mtk 11200000.xhci: xHCI Host Controller [ 0.287210] xhci-mtk 11200000.xhci: new USB bus registered, assigned bus number 2 [ 0.287221] xhci-mtk 11200000.xhci: Host supports USB 3.0 SuperSpeed [ 0.287309] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 0.287317] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.287323] usb usb1: Product: xHCI Host Controller [ 0.287329] usb usb1: Manufacturer: Linux 5.10.180-22631-gc8e37fc5f0ab xhci-hcd [ 0.287335] usb usb1: SerialNumber: 11200000.xhci [ 0.287602] hub 1-0:1.0: USB hub found [ 0.287624] hub 1-0:1.0: 1 port detected [ 0.287843] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 0.287897] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 0.287904] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.287911] usb usb2: Product: xHCI Host Controller [ 0.287916] usb usb2: Manufacturer: Linux 5.10.180-22631-gc8e37fc5f0ab xhci-hcd [ 0.287922] usb usb2: SerialNumber: 11200000.xhci [ 0.288151] hub 2-0:1.0: USB hub found [ 0.288170] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19) [ 0.288413] usbcore: registered new interface driver cdc_acm [ 0.288420] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 0.288534] usbcore: registered new interface driver uas [ 0.288576] usbcore: registered new interface driver usb-storage [ 0.289829] mt6397-rtc mt6358-rtc: registered as rtc0 [ 0.290007] mt6397-rtc mt6358-rtc: setting system clock to 2023-08-17T07:26:33 UTC (1692257193) [ 0.290039] i2c /dev entries driver [ 0.293099] at24 4-0050: GPIO lookup for consumer wp [ 0.293104] at24 4-0050: using device tree for GPIO lookup [ 0.293117] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/soc/i2c@11008000/eeprom@50[0]' [ 0.293126] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/soc/i2c@11008000/eeprom@50[0]' [ 0.293131] at24 4-0050: using lookup tables for GPIO lookup [ 0.293135] at24 4-0050: No GPIO consumer wp found [ 0.293347] at24 4-0050: 4096 byte 24c32 EEPROM, writable, 32 bytes/write [ 0.295503] tpm_tis_spi spi0.0: 2.0 TPM (device-id 0x28, rev-id 0) [ 0.296034] at24 2-0058: GPIO lookup for consumer wp [ 0.296038] at24 2-0058: using device tree for GPIO lookup [ 0.296050] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/soc/i2c@11009000/eeprom@58[0]' [ 0.296059] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/soc/i2c@11009000/eeprom@58[0]' [ 0.296064] at24 2-0058: using lookup tables for GPIO lookup [ 0.296068] at24 2-0058: No GPIO consumer wp found [ 0.296271] at24 2-0058: 4096 byte 24c32 EEPROM, writable, 32 bytes/write [ 0.301437] mtk-wdt 10007000.watchdog: Watchdog enabled (timeout=31 sec, nowayout=0) [ 0.301793] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 0.301937] device-mapper: verity-chromeos: dm-verity-chromeos registered [ 0.302269] cpu cpu0: dummy supplies not allowed for exclusive requests [ 0.303113] cpu cpu4: dummy supplies not allowed for exclusive requests [ 0.304004] cpu cpu0: EM: created perf domain [ 0.304349] cpu cpu4: EM: created perf domain [ 0.304710] cpufreq: cpufreq_online: CPU4: Running at unlisted initial frequency: 1199999 KHz, changing to: 1248000 KHz [ 0.305952] pwrseq_simple wifi-pwrseq: GPIO lookup for consumer reset [ 0.305956] pwrseq_simple wifi-pwrseq: using device tree for GPIO lookup [ 0.305973] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/wifi-pwrseq[0]' - status (0) [ 0.305984] gpio gpiochip0: Persistence not supported for GPIO 119 [ 0.306149] sdhci: Secure Digital Host Controller Interface driver [ 0.306153] sdhci: Copyright(c) Pierre Ossman [ 0.306342] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.307055] SMCCC: SOC_ID: ARCH_FEATURES(ARCH_SOC_ID) returned error: fffffffffffffffd [ 0.307087] hid: raw HID events driver (C) Jiri Kosina [ 0.307123] mtk-msdc 11240000.mmc: GPIO lookup for consumer wp [ 0.307125] mtk-msdc 11230000.mmc: GPIO lookup for consumer wp [ 0.307128] mtk-msdc 11230000.mmc: using device tree for GPIO lookup [ 0.307130] mtk-msdc 11240000.mmc: using device tree for GPIO lookup [ 0.307142] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/soc/mmc@11230000[0]' [ 0.307145] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/soc/mmc@11240000[0]' [ 0.307153] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/soc/mmc@11240000[0]' [ 0.307156] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/soc/mmc@11230000[0]' [ 0.307162] mtk-msdc 11230000.mmc: using lookup tables for GPIO lookup [ 0.307163] mtk-msdc 11240000.mmc: using lookup tables for GPIO lookup [ 0.307167] mtk-msdc 11240000.mmc: No GPIO consumer wp found [ 0.307168] mtk-msdc 11230000.mmc: No GPIO consumer wp found [ 0.307300] mtk-msdc 11240000.mmc: allocated mmc-pwrseq [ 0.307429] usbcore: registered new interface driver usbhid [ 0.307434] usbhid: USB HID core driver [ 0.307766] i2c_hid_of 0-005d: supply vdd not found, using dummy regulator [ 0.307833] i2c_hid_of 0-005d: supply vddl not found, using dummy regulator [ 0.307844] ashmem: initialized [ 0.308260] spi_master spi2: will run message pump with realtime priority [ 0.311652] max98357a max98357a: GPIO lookup for consumer sdmode [ 0.311657] max98357a max98357a: using device tree for GPIO lookup [ 0.311670] of_get_named_gpiod_flags: parsed 'sdmode-gpios' property of node '/max98357a[0]' - status (0) [ 0.311682] gpio gpiochip0: Persistence not supported for GPIO 175 [ 0.311847] mt6358-sound mt6358-sound: mt6358_platform_driver_probe(), dev name mt6358-sound [ 0.312864] mt8183_mt6358_ts3a227 mt8183-sound: mt8183_mt6358_ts3a227_max98357_dev_probe Can't find pin state wov -19 [ 0.313366] GACT probability NOT on [ 0.313673] xt_time: kernel timezone is -0000 [ 0.313906] Initializing XFRM netlink socket [ 0.314074] NET: Registered protocol family 10 [ 0.314444] Segment Routing with IPv6 [ 0.314563] NET: Registered protocol family 17 [ 0.314572] NET: Registered protocol family 15 [ 0.314812] registered taskstats version 1 [ 0.314821] Loading compiled-in X.509 certificates [ 0.314911] Key type .fscrypt registered [ 0.314915] Key type fscrypt-provisioning registered [ 0.315107] pstore: Using crash dump compression: deflate [ 0.315687] Key type encrypted registered [ 0.326071] pwm-backlight backlight_lcd0: GPIO lookup for consumer enable [ 0.326077] pwm-backlight backlight_lcd0: using device tree for GPIO lookup [ 0.326093] of_get_named_gpiod_flags: parsed 'enable-gpios' property of node '/backlight_lcd0[0]' - status (0) [ 0.326105] gpio gpiochip0: Persistence not supported for GPIO 176 [ 0.326108] gpio-496 (enable): no flags found for enable [ 0.329716] panel-boe-tv101wum-nl6 14014000.dsi.0: supply pp3300 not found, using dummy regulator [ 0.329825] panel-boe-tv101wum-nl6 14014000.dsi.0: GPIO lookup for consumer enable [ 0.329828] panel-boe-tv101wum-nl6 14014000.dsi.0: using device tree for GPIO lookup [ 0.329844] of_get_named_gpiod_flags: parsed 'enable-gpios' property of node '/soc/dsi@14014000/panel@0[0]' - status (0) [ 0.329855] gpio gpiochip0: Persistence not supported for GPIO 45 [ 0.330200] mali 13040000.mali: Kernel DDK version r40p0-01eac0 [ 0.330209] mali 13040000.mali: IRQ JOB not found [ 0.330223] mali 13040000.mali: IRQ MMU not found [ 0.330232] mali 13040000.mali: IRQ GPU not found [ 0.334865] mt8183-audio 11220000.audio-controller:mt8183-afe-pcm: No cache defaults, reading back from HW [ 0.335352] mt8183-audio 11220000.audio-controller:mt8183-afe-pcm: mtk_afe_combine_sub_dai(), num of dai 20 [ 0.335985] mt8183_mt6358_ts3a227 mt8183-sound: mt8183_mt6358_ts3a227_max98357_dev_probe Can't find pin state wov -19 [ 0.336757] pwm-backlight backlight_lcd0: GPIO lookup for consumer enable [ 0.336760] pwm-backlight backlight_lcd0: using device tree for GPIO lookup [ 0.336774] of_get_named_gpiod_flags: parsed 'enable-gpios' property of node '/backlight_lcd0[0]' - status (0) [ 0.336785] gpio gpiochip0: Persistence not supported for GPIO 176 [ 0.336787] gpio-496 (enable): no flags found for enable [ 0.337924] mtk-iommu 10205000.iommu: bound 14017000.larb (ops 0xffffffd245345888) [ 0.337936] mtk-iommu 10205000.iommu: bound 16010000.larb (ops 0xffffffd245345888) [ 0.337941] mtk-iommu 10205000.iommu: bound 1502f000.larb (ops 0xffffffd245345888) [ 0.337947] mtk-iommu 10205000.iommu: bound 1a002000.larb (ops 0xffffffd245345888) [ 0.337952] mtk-iommu 10205000.iommu: bound 17010000.larb (ops 0xffffffd245345888) [ 0.337957] mtk-iommu 10205000.iommu: bound 15021000.larb (ops 0xffffffd245345888) [ 0.337962] mtk-iommu 10205000.iommu: bound 1a001000.larb (ops 0xffffffd245345888) [ 0.338074] mediatek-disp-ovl 14008000.ovl: Adding to iommu group 0 [ 0.338452] mediatek-disp-ovl 14009000.ovl: Adding to iommu group 0 [ 0.338627] mediatek-disp-ovl 1400a000.ovl: Adding to iommu group 0 [ 0.338635] cros-ec-pchg cros-ec-pchg.14.auto: Unable to get number or ports (err:-95) [ 0.338641] cros-ec-pchg cros-ec-pchg.14.auto: No peripheral charge ports (err:-95) [ 0.338823] mediatek-disp-rdma 1400b000.rdma: Adding to iommu group 0 [ 0.339148] mediatek-disp-rdma 1400c000.rdma: Adding to iommu group 0 [ 0.339453] sbs-battery 12-000b: GPIO lookup for consumer sbs,battery-detect [ 0.339456] sbs-battery 12-000b: using device tree for GPIO lookup [ 0.339465] of_get_named_gpiod_flags: can't parse 'sbs,battery-detect-gpios' property of node '/soc/spi@11012000/cros-ec@0/i2c-tunnel/sbs-battery@b[0]' [ 0.339472] of_get_named_gpiod_flags: can't parse 'sbs,battery-detect-gpio' property of node '/soc/spi@11012000/cros-ec@0/i2c-tunnel/sbs-battery@b[0]' [ 0.339476] sbs-battery 12-000b: using lookup tables for GPIO lookup [ 0.339479] sbs-battery 12-000b: No GPIO consumer sbs,battery-detect found [ 0.340180] panel-boe-tv101wum-nl6 14014000.dsi.0: supply pp3300 not found, using dummy regulator [ 0.340265] panel-boe-tv101wum-nl6 14014000.dsi.0: GPIO lookup for consumer enable [ 0.340268] panel-boe-tv101wum-nl6 14014000.dsi.0: using device tree for GPIO lookup [ 0.340281] of_get_named_gpiod_flags: parsed 'enable-gpios' property of node '/soc/dsi@14014000/panel@0[0]' - status (0) [ 0.340291] gpio gpiochip0: Persistence not supported for GPIO 45 [ 0.340624] mali 13040000.mali: Kernel DDK version r40p0-01eac0 [ 0.340632] mali 13040000.mali: IRQ JOB not found [ 0.340642] mali 13040000.mali: IRQ MMU not found [ 0.340651] mali 13040000.mali: IRQ GPU not found [ 0.342165] mali 13040000.mali: GPU identified as 0x1 arch 6.2.2 r0p3 status 0 [ 0.342644] mali 13040000.mali: No priority control manager is configured [ 0.342650] mali 13040000.mali: No memory group manager is configured [ 0.342821] thermal thermal_zone9: power_allocator: sustainable_power will be estimated [ 0.342896] sbs-battery 12-000b: sbs-battery: battery gas gauge device registered [ 0.343551] mali 13040000.mali: Using configured power model mali-g72-power-model, and fallback mali-simple-power-model [ 0.343562] mali 13040000.mali: No volt-bin detected, using default OPP table [ 0.343573] mali 13040000.mali: OPP 0 : opp_freq=300000000 core_mask=f [ 0.343579] mali 13040000.mali: OPP 1 : opp_freq=320000000 core_mask=f [ 0.343585] mali 13040000.mali: OPP 2 : opp_freq=340000000 core_mask=f [ 0.343591] mali 13040000.mali: OPP 3 : opp_freq=360000000 core_mask=f [ 0.343596] mali 13040000.mali: OPP 4 : opp_freq=380000000 core_mask=f [ 0.343601] mali 13040000.mali: OPP 5 : opp_freq=400000000 core_mask=f [ 0.343606] mali 13040000.mali: OPP 6 : opp_freq=420000000 core_mask=f [ 0.343611] mali 13040000.mali: OPP 7 : opp_freq=460000000 core_mask=f [ 0.343616] mali 13040000.mali: OPP 8 : opp_freq=500000000 core_mask=f [ 0.343621] mali 13040000.mali: OPP 9 : opp_freq=540000000 core_mask=f [ 0.343626] mali 13040000.mali: OPP 10 : opp_freq=580000000 core_mask=f [ 0.343631] mali 13040000.mali: OPP 11 : opp_freq=620000000 core_mask=f [ 0.343635] mali 13040000.mali: OPP 12 : opp_freq=653000000 core_mask=f [ 0.343640] mali 13040000.mali: OPP 13 : opp_freq=698000000 core_mask=f [ 0.343645] mali 13040000.mali: OPP 14 : opp_freq=743000000 core_mask=f [ 0.343649] mali 13040000.mali: OPP 15 : opp_freq=800000000 core_mask=f [ 0.344054] mali 13040000.mali: Probed as mali0 [ 0.344985] mt8183_mt6358_ts3a227 mt8183-sound: mt8183_mt6358_ts3a227_max98357_dev_probe Can't find pin state wov -19 [ 0.345900] mtk-svs 1100b000.svs: M_HW_RES0: 0x00220090 [ 0.345906] mtk-svs 1100b000.svs: M_HW_RES1: 0xa3ffff5f [ 0.345910] mtk-svs 1100b000.svs: M_HW_RES2: 0x47cf478f [ 0.345914] mtk-svs 1100b000.svs: M_HW_RES3: 0xe2febf1f [ 0.345917] mtk-svs 1100b000.svs: M_HW_RES4: 0xa3ffffab [ 0.345921] mtk-svs 1100b000.svs: M_HW_RES5: 0x47e04b83 [ 0.345925] mtk-svs 1100b000.svs: M_HW_RES6: 0xa3ff84ad [ 0.345928] mtk-svs 1100b000.svs: M_HW_RES7: 0xa3ff356d [ 0.345932] mtk-svs 1100b000.svs: M_HW_RES8: 0x4be04bac [ 0.345935] mtk-svs 1100b000.svs: M_HW_RES9: 0xe2fe5c52 [ 0.345939] mtk-svs 1100b000.svs: M_HW_RES14: 0x662e75c3 [ 0.345943] mtk-svs 1100b000.svs: M_HW_RES15: 0x00320015 [ 0.345946] mtk-svs 1100b000.svs: M_HW_RES16: 0xa3ffc744 [ 0.345950] mtk-svs 1100b000.svs: M_HW_RES17: 0x47e047ac [ 0.345954] mtk-svs 1100b000.svs: M_HW_RES18: 0xe2fe9f06 [ 0.348144] devfreq 13040000.mali: Couldn't update frequency transition information. [ 0.348934] SVSB_CPU_LITTLE: svs_init01_isr_handler: VDN74~30:0x151e272e~0x33383d43, DC:0x02da012a [ 0.349082] tpm_tis_spi spi0.0: Cr50 firmware version: B2-D:0 RO_A:0.0.12/bf248b9d RW_B:0.5.180/cr50_v2.94_mp.205-cc2de [ 0.349227] SVSB_CPU_BIG: svs_init01_isr_handler: VDN74~30:0x16202931~0x363b4147, DC:0x02fffef8 [ 0.349495] SVSB_CCI: svs_init01_isr_handler: VDN74~30:0x141a242c~0x31363e43, DC:0x02d500fd [ 0.349771] SVSB_GPU: svs_init01_isr_handler: VDN74~30:0x1517181b~0x1f23262a, DC:0x02d60106 [ 0.352475] SVSB_CPU_LITTLE: svs_init02_isr_handler: VOP74~30:0x1c252e35~0x3a3f444a, DC:0x02da0000 [ 0.352719] SVSB_CPU_BIG: svs_init02_isr_handler: VOP74~30:0x1f29323a~0x40444a50, DC:0x02ff0108 [ 0.352783] SVSB_CCI: svs_init02_isr_handler: VOP74~30:0x1b212b33~0x383d454a, DC:0x02d50000 [ 0.352951] SVSB_GPU: svs_init02_isr_handler: VOP74~30:0x17191a1d~0x2125282c, DC:0x02d60000 [ 0.354124] input: cros_ec_buttons as /devices/platform/soc/11012000.spi/spi_master/spi2/spi2.0/11012000.spi:cros-ec@0:keyboard-controller/input/input0 [ 0.354473] it6505 3-005c: GPIO lookup for consumer reset [ 0.354480] it6505 3-005c: using device tree for GPIO lookup [ 0.354501] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/soc/i2c@1100f000/it6505dptx@5c[0]' - status (0) [ 0.354517] gpio gpiochip0: Persistence not supported for GPIO 179 [ 0.355764] mt8183_mt6358_ts3a227 mt8183-sound: mt8183_mt6358_ts3a227_max98357_dev_probe Can't find pin state wov -19 [ 0.356286] debugfs: Directory '11220000.audio-controller:mt8183-afe-pcm' with parent 'mt8183_mt6358_ts3a227_max98357' already present! [ 0.358498] hdmi-audio-codec hdmi-audio-codec.16.auto: ASoC: sink widget TX overwritten [ 0.362138] debugfs: File 'Playback' in directory 'dapm' already present! [ 0.362151] debugfs: File 'Capture' in directory 'dapm' already present! [ 0.363612] input: mt8183_mt6358_ts3a227_max98357 HDMI Jack as /devices/platform/mt8183-sound/sound/card0/input1 [ 0.364581] mediatek-dpi 14015000.dpi: Found bridge node: /soc/i2c@1100f000/it6505dptx@5c [ 0.365041] mediatek-drm mediatek-drm.1.auto: bound 14008000.ovl (ops 0xffffffd2452d8288) [ 0.365052] mediatek-drm mediatek-drm.1.auto: bound 14009000.ovl (ops 0xffffffd2452d8288) [ 0.365060] mediatek-drm mediatek-drm.1.auto: bound 1400a000.ovl (ops 0xffffffd2452d8288) [ 0.365069] mediatek-drm mediatek-drm.1.auto: bound 1400b000.rdma (ops 0xffffffd2452d8cb0) [ 0.365077] mediatek-drm mediatek-drm.1.auto: bound 1400c000.rdma (ops 0xffffffd2452d8cb0) [ 0.365085] mediatek-drm mediatek-drm.1.auto: bound 1400e000.color (ops 0xffffffd2452d7818) [ 0.365092] mediatek-drm mediatek-drm.1.auto: bound 1400f000.ccorr (ops 0xffffffd2452d74e0) [ 0.365100] mediatek-drm mediatek-drm.1.auto: bound 14010000.aal (ops 0xffffffd2452d7270) [ 0.365107] mediatek-drm mediatek-drm.1.auto: bound 14011000.gamma (ops 0xffffffd2452d7a90) [ 0.366254] mediatek-drm mediatek-drm.1.auto: bound 14014000.dsi (ops 0xffffffd2452de428) [ 0.366498] mediatek-drm mediatek-drm.1.auto: bound 14015000.dpi (ops 0xffffffd2452dde58) [ 0.367222] [drm] Initialized mediatek 1.0.0 20150513 for mediatek-drm.1.auto on minor 0 [ 0.367584] cros-ec-spi spi2.0: Chrome EC device registered [ 0.368406] of_get_named_gpiod_flags: parsed 'gpios' property of node '/wifi-wakeup/wowlan[0]' - status (0) [ 0.368422] gpio gpiochip0: Persistence not supported for GPIO 113 [ 0.368556] input: wifi-wakeup as /devices/platform/wifi-wakeup/input/input2 [ 0.368851] device-mapper: init: waiting for all devices to be available before creating mapped devices [ 0.370434] mmc1: queuing unknown CIS tuple 0x01 (3 bytes) [ 0.377746] mmc1: queuing unknown CIS tuple 0x1a (5 bytes) [ 0.380933] mmc1: queuing unknown CIS tuple 0x1b (8 bytes) [ 0.381571] mmc1: queuing unknown CIS tuple 0x14 (0 bytes) [ 0.384282] mtk-msdc 11240000.mmc: phase: [map:fc1fffff] [maxlen:21] [final:7] [ 0.385183] mmc1: queuing unknown CIS tuple 0x80 (1 bytes) [ 0.385235] mmc1: queuing unknown CIS tuple 0x81 (1 bytes) [ 0.385287] mmc1: queuing unknown CIS tuple 0x82 (1 bytes) [ 0.385318] mmc1: new ultra high speed SDR104 SDIO card at address 0001 [ 0.392400] sbs-battery 12-000b: I2C adapter does not support I2C_FUNC_SMBUS_READ_BLOCK_DATA. Fallback method does not support PEC. [ 0.394985] sbs-battery 12-000b: Unknown chemistry: [ 0.397411] mtk-msdc 11230000.mmc: phase: [map:ffffffff] [maxlen:32] [final:10] [ 0.397636] mmc0: new HS400 MMC card at address 0001 [ 0.399250] mmcblk0: mmc0:0001 DV6DAB 116 GiB [ 0.400474] mmcblk0boot0: mmc0:0001 DV6DAB partition 1 4.00 MiB [ 0.401713] mmcblk0boot1: mmc0:0001 DV6DAB partition 2 4.00 MiB [ 0.401903] mmcblk0rpmb: mmc0:0001 DV6DAB partition 3 16.0 MiB, chardev (241:0) [ 0.406907] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 0.504143] input: hid-over-i2c 27C6:0E30 as /devices/platform/soc/11007000.i2c/i2c-0/0-005d/0018:27C6:0E30.0001/input/input3 [ 0.504410] input: hid-over-i2c 27C6:0E30 Stylus as /devices/platform/soc/11007000.i2c/i2c-0/0-005d/0018:27C6:0E30.0001/input/input4 [ 0.504659] input: hid-over-i2c 27C6:0E30 Stylus as /devices/platform/soc/11007000.i2c/i2c-0/0-005d/0018:27C6:0E30.0001/input/input5 [ 0.505105] input: hid-over-i2c 27C6:0E30 UNKNOWN as /devices/platform/soc/11007000.i2c/i2c-0/0-005d/0018:27C6:0E30.0001/input/input6 [ 0.505780] hid-multitouch 0018:27C6:0E30.0001: input,hidraw0: I2C HID v1.00 Device [hid-over-i2c 27C6:0E30] on 0-005d [ 0.506574] device-mapper: verity: sha256 using implementation "sha256-ce" [ 0.507011] device-mapper: ioctl: dm-0 (vroot) is ready [ 0.507739] ALSA device list: [ 0.507748] #0: mt8183_mt6358_ts3a227_max98357 [ 0.507791] Warning: unable to open an initial console. Fallback to ttynull. [ 0.507804] printk: console [ttynull0] enabled [ 0.510048] EXT4-fs (dm-0): mounting ext2 file system using the ext4 subsystem [ 0.511769] EXT4-fs (dm-0): mounted filesystem without journal. Opts: (null) [ 0.511806] VFS: Mounted root (ext2 filesystem) readonly on device 254:0. [ 0.514547] devtmpfs: mounted [ 0.517561] Freeing unused kernel memory: 1408K [ 0.518913] Run /sbin/init as init process [ 0.518924] with arguments: [ 0.518928] /sbin/init [ 0.518931] cros_secure [ 0.518934] with environment: [ 0.518937] HOME=/ [ 0.518940] TERM=linux [ 0.518946] dm=1 vroot none ro 1,0 6144000 verity payload=PARTUUID=6054c8b5-2c17-4e3e-9f5f-bc2a96bf764b/PARTNROFF=1 hashtree=PARTUUID=6054c8b5-2c17-4e3e-9f5f-bc2a96bf764b/PARTNROFF=1 hashstart=6144000 alg=sha256 root_hexdigest=8e442d4eb6f01e3bd21b5b42ede889cd67a316fd949cf05b380e2142181e440f salt=23867f54c1aa0a406880edb52304b63453d25a71950b6d213fce0b11185a03fb [ 0.590437] audit: type=1404 audit(1692257193.799:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 enabled=1 old-enabled=1 lsm=selinux res=1 [ 0.629430] SELinux: Permission nlmsg_getneigh in class netlink_route_socket not defined in policy. [ 0.629513] SELinux: Permission bpf in class capability2 not defined in policy. [ 0.629519] SELinux: Permission checkpoint_restore in class capability2 not defined in policy. [ 0.629540] SELinux: Permission bpf in class cap2_userns not defined in policy. [ 0.629545] SELinux: Permission checkpoint_restore in class cap2_userns not defined in policy. [ 0.629635] SELinux: the above unknown classes and permissions will be denied [ 0.633846] SELinux: policy capability network_peer_controls=1 [ 0.633864] SELinux: policy capability open_perms=1 [ 0.633870] SELinux: policy capability extended_socket_class=1 [ 0.633874] SELinux: policy capability always_check_network=0 [ 0.633879] SELinux: policy capability cgroup_seclabel=0 [ 0.633884] SELinux: policy capability nnp_nosuid_transition=1 [ 0.633889] SELinux: policy capability genfs_seclabel_symlinks=0 [ 0.633893] SELinux: policy capability ioctl_skip_cloexec=0 [ 0.689753] usb 1-1: new high-speed USB device number 2 using xhci-mtk [ 0.732548] audit: type=1403 audit(1692257193.941:3): auid=4294967295 ses=4294967295 lsm=selinux res=1 [ 0.817166] usb 1-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=60.60 [ 0.817186] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 0.817193] usb 1-1: Product: USB2.0 Hub [ 0.818242] hub 1-1:1.0: USB hub found [ 0.818554] hub 1-1:1.0: 4 ports detected [ 1.022132] audit: type=1400 audit(1692257194.231:4): avc: granted { execute } for pid=335 comm="sh" name="crash_reporter" dev="dm-0" ino=2223 scontext=u:r:cros_init_scripts:s0 tcontext=u:object_r:cros_crash_reporter_exec:s0 tclass=file [ 1.097735] usb 1-1.1: new full-speed USB device number 3 using xhci-mtk [ 1.176062] usb 1-1.1: New USB device found, idVendor=18d1, idProduct=503c, bcdDevice= 1.00 [ 1.176081] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.176088] usb 1-1.1: Product: Hammer [ 1.176095] usb 1-1.1: Manufacturer: Google Inc. [ 1.176100] usb 1-1.1: SerialNumber: 1e0022000657415636313520 [ 1.179295] input: Google Inc. Hammer as /devices/platform/soc/11201000.usb/11200000.xhci/usb1/1-1/1-1.1/1-1.1:1.0/0003:18D1:503C.0002/input/input7 [ 1.231102] hid-generic 0003:18D1:503C.0002: input,hidraw1: USB HID v1.00 Keyboard [Google Inc. Hammer] on usb-11200000.xhci-1.1/input0 [ 1.235048] input: Google Inc. Hammer as /devices/platform/soc/11201000.usb/11200000.xhci/usb1/1-1/1-1.1/1-1.1:1.2/0003:18D1:503C.0003/input/input8 [ 1.237342] udevd[349]: starting version 225 [ 1.287103] hid-multitouch 0003:18D1:503C.0003: input,hidraw2: USB HID v1.00 Device [Google Inc. Hammer] on usb-11200000.xhci-1.1/input2 [ 1.318873] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: commit=600,discard [ 1.322125] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: [ 1.396540] EXT4-fs (mmcblk0p1): re-mounted. Opts: [ 1.400984] LoadPin: dm-0 (254:0): read-only [ 1.401003] LoadPin: load pinning engaged. [ 1.401034] LoadPin: kernel-module pinned obj="/lib/modules/5.10.180-22631-gc8e37fc5f0ab/kernel/drivers/hid/hid-google-hammer.ko.gz" pid=402 cmdline="udevd --daemon" [ 1.402952] input: Whiskers Tablet Mode Switch as /devices/platform/soc/11012000.spi/spi_master/spi2/spi2.0/11012000.spi:cros-ec@0:cbas/input/input9 [ 1.405411] input: Google Inc. Hammer as /devices/platform/soc/11201000.usb/11200000.xhci/usb1/1-1/1-1.1/1-1.1:1.0/0003:18D1:503C.0002/input/input10 [ 1.459669] hammer 0003:18D1:503C.0002: input,hidraw1: USB HID v1.00 Keyboard [Google Inc. Hammer] on usb-11200000.xhci-1.1/input0 [ 1.771719] frecon[661]: Frecon using drm driver mediatek, version 1.0, date(20150513), desc(Mediatek SoC DRM) [ 1.817896] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: discard,commit=600 [ 1.983285] encrypted-reboo (pid 688) is setting deprecated v1 encryption policy; recommend upgrading to v2. [ 1.998214] audit: type=1400 audit(1692257195.207:5): avc: granted { execute } for pid=689 comm="chromeos_startu" name="crash_reporter" dev="dm-0" ino=2223 scontext=u:r:chromeos_startup:s0 tcontext=u:object_r:cros_crash_reporter_exec:s0 tclass=file [ 2.375942] frecon[661]: Frecon using drm driver mediatek, version 1.0, date(20150513), desc(Mediatek SoC DRM) [ 2.408291] frecon[661]: Frecon using drm driver mediatek, version 1.0, date(20150513), desc(Mediatek SoC DRM) [ 2.777084] low_mem: threshold[0] 202 MB [ 2.777111] low_mem: threshold[1] 1554 MB [ 2.807433] zram: Added device: zram0 [ 2.833895] init: console-ttyS0 main process (713) killed by TERM signal [ 2.933479] zram0: detected capacity change from 0 to 7957209088 [ 2.981671] Adding 7770708k swap on /dev/zram0. Priority:-2 extents:1 across:7770708k SS [ 3.619866] OF: graph: no port node found in /soc/spi@11012000/cros-ec@0/typec/connector@0 [ 3.619894] OF: graph: no port node found in /soc/spi@11012000/cros-ec@0/typec/connector@0 [ 3.619903] OF: graph: no port node found in /soc/spi@11012000/cros-ec@0/typec/connector@0 [ 3.630402] OF: graph: no port node found in /soc/spi@11012000/cros-ec@0/typec/connector@0 [ 3.630431] OF: graph: no port node found in /soc/spi@11012000/cros-ec@0/typec/connector@0 [ 3.630440] OF: graph: no port node found in /soc/spi@11012000/cros-ec@0/typec/connector@0 [ 3.630452] OF: graph: no port node found in /soc/spi@11012000/cros-ec@0/typec/connector@0 [ 3.630462] OF: graph: no port node found in /soc/spi@11012000/cros-ec@0/typec/connector@0 [ 3.630470] OF: graph: no port node found in /soc/spi@11012000/cros-ec@0/typec/connector@0 [ 3.630570] OF: graph: no port node found in /soc/spi@11012000/cros-ec@0/typec/connector@0 [ 3.630580] OF: graph: no port node found in /soc/spi@11012000/cros-ec@0/typec/connector@0 [ 3.815289] gpio gpiochip0: Persistence not supported for GPIO 150 [ 3.815312] gpio gpiochip0: registered chardev handle for line 150 [ 3.815329] gpio gpiochip0: registered chardev handle for 1 lines [ 4.294243] Bluetooth: bt_init() Core ver 2.22 [ 4.294388] NET: Registered protocol family 31 [ 4.294395] Bluetooth: bt_init() HCI device and connection manager initialized [ 4.294413] Bluetooth: hci_sock_init() HCI socket layer initialized [ 4.294423] Bluetooth: l2cap_init_sockets() L2CAP socket layer initialized [ 4.294449] Bluetooth: sco_init() SCO socket layer initialized [ 4.641901] ath10k_sdio mmc1:0001:1: qca6174 hw3.2 sdio target 0x05030000 chip_id 0x00000000 sub 0000:0000 [ 4.641931] ath10k_sdio mmc1:0001:1: kconfig debug 1 debugfs 1 tracing 1 dfs 0 testmode 1 [ 4.642307] ath10k_sdio mmc1:0001:1: firmware ver WLAN.RMH.4.4.1-00189 api 6 features wowlan,ignore-otp,mfp crc32 595e0108 [ 4.797564] ath10k_sdio mmc1:0001:1: board_file api 2 bmi_id 0:4 crc32 e57aadc7 [ 5.143647] ath10k_sdio mmc1:0001:1: htt-ver 3.87 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1 [ 5.211382] mmc1: queuing unknown CIS tuple 0x01 (3 bytes) [ 5.218857] mmc1: queuing unknown CIS tuple 0x1a (5 bytes) [ 5.222462] mmc1: queuing unknown CIS tuple 0x1b (8 bytes) [ 5.226077] mtk-msdc 11240000.mmc: phase: [map:fc1fffff] [maxlen:21] [final:7] [ 5.226260] ath: EEPROM regdomain: 0x6c [ 5.226265] ath: EEPROM indicates we should expect a direct regpair map [ 5.226274] ath: Country alpha2 being used: 00 [ 5.226278] ath: Regpair used: 0x6c [ 7.164444] frecon[661]: Chrome started, our work is done, exiting. [ 7.297522] init: failsafe-delay main process (906) killed by TERM signal [ 7.526099] fuse: init (API version 7.32) [ 7.624179] cgroup: cgroup: disabling cgroup2 socket matching due to net_prio or net_cls activation [ 8.095499] mtk-scp 10500000.scp: invalid resource [ 8.095591] mtk-scp 10500000.scp: assigned reserved memory node scp_mem_region [ 8.103096] remoteproc remoteproc0: scp is available [ 8.111799] remoteproc remoteproc0: powering up scp [ 8.111838] remoteproc remoteproc0: Booting fw image scp.img, size 1032064 [ 8.111872] mtk-scp 10500000.scp: IPI buf addr 0x0007bdb0 [ 8.214038] Bluetooth: hci_uart_init() HCI UART driver ver 2.3 [ 8.214065] Bluetooth: hci_uart_register_proto() HCI UART protocol H4 registered [ 8.214148] Bluetooth: hci_uart_register_proto() HCI UART protocol Three-wire (H5) registered [ 8.214191] Bluetooth: hci_uart_register_proto() HCI UART protocol QCA registered [ 8.214527] hci_uart_qca serial0-0: GPIO lookup for consumer enable [ 8.214539] hci_uart_qca serial0-0: using device tree for GPIO lookup [ 8.214593] of_get_named_gpiod_flags: parsed 'enable-gpios' property of node '/soc/serial@11003000/bluetooth[0]' - status (0) [ 8.214620] gpio gpiochip0: Persistence not supported for GPIO 120 [ 8.215496] Bluetooth: qca_setup() hci0: setting up ROME/QCA6390 [ 8.216917] ov02a10 4-003d: GPIO lookup for consumer powerdown [ 8.216927] ov02a10 4-003d: using device tree for GPIO lookup [ 8.216960] of_get_named_gpiod_flags: parsed 'powerdown-gpios' property of node '/soc/i2c@11008000/sensor_sub@3d[0]' - status (0) [ 8.216982] gpio gpiochip0: Persistence not supported for GPIO 107 [ 8.216992] ov02a10 4-003d: GPIO lookup for consumer reset [ 8.216996] ov02a10 4-003d: using device tree for GPIO lookup [ 8.217007] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/soc/i2c@11008000/sensor_sub@3d[0]' - status (0) [ 8.217015] gpio gpiochip0: Persistence not supported for GPIO 109 [ 8.237761] ov8856 2-0010: GPIO lookup for consumer reset [ 8.237777] ov8856 2-0010: using device tree for GPIO lookup [ 8.237815] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/soc/i2c@11009000/sensor_main@10[0]' - status (0) [ 8.237840] gpio gpiochip0: Persistence not supported for GPIO 111 [ 8.238649] ov8856 2-0010: external clock rate 24000000 is unsupported [ 8.281947] mtk-scp 10500000.scp: creating channel cros-ec-rpmsg addr 0xd [ 8.281951] mtk-scp 10500000.scp: SCP is ready. FW version kukui_scp_v2.0.2771-7a68c38973 [ 8.281963] remoteproc remoteproc0: remote processor scp is now up [ 8.395651] mtk-mdp3 14001000.mdp3_rdma0: Adding to iommu group 0 [ 8.396070] mtk-mdp3 14001000.mdp3_rdma0: can't get node mediatek,mmsys2 [ 8.396081] mtk-mdp3 14001000.mdp3_rdma0: Failed to get mdp mmsys2 [ 8.396245] mtk-mdp3 14001000.mdp3_rdma0: Failed to get mdp mm-mutex2 [ 8.396750] mtk-mdp3 14001000.mdp3_rdma0: mdp3_rdma0 type:3 alias:0 id:11 base:0x14001000 regs:0000000064cf5a95 [ 8.396814] mtk-mdp3 14001000.mdp3_rdma0: mdp3_rdma0 type:23 alias:0 id:9 base:0x14000000 regs:00000000041ba86e [ 8.396872] mtk-mdp3 14001000.mdp3_rdma0: mdp3_rdma0 type:24 alias:1 id:10 base:0x14000000 regs:000000002a1d41a5 [ 8.396900] mtk-mdp3 14001000.mdp3_rdma0: mdp3_rdma0 type:7 alias:0 id:18 base:0x14005000 regs:000000001a2d02aa [ 8.396929] mtk-mdp3 14001000.mdp3_rdma0: mdp3_rdma0 type:8 alias:1 id:19 base:0x14006000 regs:0000000036542192 [ 8.396956] mtk-mdp3 14001000.mdp3_rdma0: mdp3_rdma0 type:1 alias:0 id:4 base:0x15020000 regs:0000000074084632 [ 8.396983] mtk-mdp3 14001000.mdp3_rdma0: mdp3_rdma0 type:22 alias:1 id:6 base:0x15020000 regs:00000000083ce4a7 [ 8.397028] mtk-mdp3 14001000.mdp3_rdma0: mdp3_rdma0 type:4 alias:0 id:14 base:0x14003000 regs:00000000ae461a2c [ 8.397066] mtk-mdp3 14001000.mdp3_rdma0: mdp3_rdma0 type:4 alias:1 id:15 base:0x14004000 regs:000000002663380b [ 8.397107] mtk-mdp3 14001000.mdp3_rdma0: mdp3_rdma0 type:5 alias:0 id:20 base:0x14005000 regs:00000000efc84e05 [ 8.397149] mtk-mdp3 14001000.mdp3_rdma0: mdp3_rdma0 type:6 alias:0 id:21 base:0x14006000 regs:000000001c5db9e3 [ 8.397270] mtk-mdp3 14001000.mdp3_rdma0: mdp3_rdma0 type:18 alias:0 id:13 base:0x1401c000 regs:000000001f1badbb [ 8.397415] mdp_debug_init:start [ 8.397575] [MTK-MDP3][ERR] mdp_alloc_reference_VA_by_name:80: DEV: cannot parse node name:mdp3-tdshp0 [ 8.397583] [MTK-MDP3][ERR] mdp_alloc_reference_VA_by_name:80: DEV: cannot parse node name:mdp3-color0 [ 8.397589] [MTK-MDP3][ERR] mdp_alloc_reference_VA_by_name:80: DEV: cannot parse node name:mdp3-aal0 [ 8.397610] [MTK-MDP3][ERR] mdp_alloc_reference_VA_by_name:80: DEV: cannot parse node name:mediatek,larb [ 8.397628] mdp_debug_init:end [ 8.398390] mtk-mdp3 14001000.mdp3_rdma0: Driver registered as /dev/video2 [ 8.423743] Bluetooth: qca_recv() hci0: Frame reassembly failed (-84) [ 8.447593] fscrypt: AES-256-CTS-CBC using implementation "cts-cbc-aes-ce" [ 8.682449] Bluetooth: qca_read_soc_version() hci0: QCA Product ID :0x00000008 [ 8.682470] Bluetooth: qca_read_soc_version() hci0: QCA SOC Version :0x00000044 [ 8.682477] Bluetooth: qca_read_soc_version() hci0: QCA ROM Version :0x00000302 [ 8.682483] Bluetooth: qca_read_soc_version() hci0: QCA Patch Version:0x00000111 [ 8.682492] Bluetooth: qca_uart_setup() hci0: QCA controller version 0x00440302 [ 8.682499] Bluetooth: qca_download_firmware() hci0: QCA Downloading qca/rampatch_00440302.bin [ 8.739555] mtk-fd-4.0 1502b000.fd: Adding to iommu group 0 [ 8.741975] mtk-fd-4.0 1502b000.fd: scp addr:0x0000000050800000 va:ffffffc018800000 [ 8.742025] mtk-fd-4.0 1502b000.fd: scp iova addr:0x00000000ffe00000 [ 8.779369] mtk-cam-dip 15022000.dip: Adding to iommu group 0 [ 8.802905] mtk-vcodec-enc 17020000.vcodec: Adding to iommu group 0 [ 8.817328] mtk-jpeg 17030000.venc_jpg: Adding to iommu group 0 [ 8.823970] mtk-jpeg 17030000.venc_jpg: mtk-jpeg-enc device registered as /dev/video27 (81,30) [ 8.827464] mtk-vcodec-dec 16000000.vcodec: Adding to iommu group 0 [ 8.844851] mtk-cam-p1 1a000000.camisp: Adding to iommu group 0 [ 8.852806] mtk-cam-p1 1a000000.camisp: Registered media3 [ 8.852827] mtk-cam-p1 1a000000.camisp: Registered mtk-cam-p1 1a000000.camisp [ 8.888027] seninf 1a040000.seninf: seninf probe + [ 8.889513] seninf 1a040000.seninf: seninf probe - [ 9.076835] Bluetooth: qca_download_firmware() hci0: QCA Downloading qca/nvm_00440302_i2s_eu.bin [ 9.170772] Bluetooth: qca_uart_setup() hci0: QCA setup on UART is completed [ 9.281130] mtk-scp 10500000.scp: No such ipi id = 13 [ 9.293291] mtk-mdp3 14001000.mdp3_rdma0: [0] type:10 [ 9.293323] mtk-mdp3 14001000.mdp3_rdma0: [0] type:10, frame:32x32 [ 9.293332] mtk-mdp3 14001000.mdp3_rdma0: [0] type:9 [ 9.293341] mtk-mdp3 14001000.mdp3_rdma0: [0] type:9, frame:32x32 [ 9.305383] cros-ec-dev cros-ec-dev.21.auto: CrOS System Control Processor MCU detected [ 9.347588] cros-ec-pchg cros-ec-pchg.28.auto: Unable to get number or ports (err:-95) [ 9.347629] cros-ec-pchg cros-ec-pchg.28.auto: No peripheral charge ports (err:-95) [ 9.349008] cros-ec-rpmsg 10500000.scp.cros-ec-rpmsg.13.-1: Chrome EC device registered [ 9.629163] mt8183-audio 11220000.audio-controller:mt8183-afe-pcm: mt8183_adda_dmic_set(), kcontrol name MTKAIF_DMIC, mtkaif_dmic 1 [ 9.779555] NET: Registered protocol family 38 [ 9.887964] Bluetooth: rfcomm_init_sockets() RFCOMM socket layer initialized [ 9.888362] Bluetooth: rfcomm_init() RFCOMM ver 1.11 [ 9.912460] gpio gpiochip0: Persistence not supported for GPIO 150 [ 9.912479] gpio gpiochip0: registered chardev handle for line 150 [ 9.912495] gpio gpiochip0: registered chardev handle for 1 lines [ 10.066495] gpio gpiochip0: Persistence not supported for GPIO 150 [ 10.066508] gpio gpiochip0: registered chardev handle for line 150 [ 10.066517] gpio gpiochip0: registered chardev handle for 1 lines [ 10.088655] Bluetooth: set_quality_report_func() quality report not supported [ 10.110560] init: cros-camera-gpu-algo main process (3871) terminated with status 127 [ 10.110618] init: cros-camera-gpu-algo main process ended, respawning [ 10.446026] gpio gpiochip0: Persistence not supported for GPIO 150 [ 10.446039] gpio gpiochip0: registered chardev handle for line 150 [ 10.446048] gpio gpiochip0: registered chardev handle for 1 lines [ 10.672143] wlan0: authenticate with 88:71:b1:81:93:1b [ 10.743536] wlan0: send auth to 88:71:b1:81:93:1b (try 1/3) [ 10.747841] wlan0: authenticated [ 10.748933] wlan0: associate with 88:71:b1:81:93:1b (try 1/3) [ 10.775373] it6505 3-005c: [drm:it6505_read] *ERROR* read failed reg[0xd] err: -6 [ 10.776383] it6505 3-005c: [drm:it6505_read] *ERROR* read failed reg[0xd] err: -6 [ 10.777287] it6505 3-005c: [drm:it6505_read] *ERROR* read failed reg[0xd] err: -6 [ 10.777607] wlan0: RX AssocResp from 88:71:b1:81:93:1b (capab=0x1011 status=0 aid=1) [ 10.778191] it6505 3-005c: [drm:it6505_read] *ERROR* read failed reg[0xd] err: -6 [ 10.779093] it6505 3-005c: [drm:it6505_read] *ERROR* read failed reg[0xd] err: -6 [ 10.780083] it6505 3-005c: [drm:it6505_read] *ERROR* read failed reg[0xd] err: -6 [ 10.781837] it6505 3-005c: [drm:it6505_read] *ERROR* read failed reg[0xd] err: -6 [ 10.782772] it6505 3-005c: [drm:it6505_read] *ERROR* read failed reg[0xd] err: -6 [ 10.783721] it6505 3-005c: [drm:it6505_read] *ERROR* read failed reg[0xd] err: -6 [ 10.784641] it6505 3-005c: [drm:it6505_read] *ERROR* read failed reg[0xd] err: -6 [ 10.785443] it6505 3-005c: [drm:it6505_read] *ERROR* read failed reg[0xd] err: -6 [ 10.786345] it6505 3-005c: [drm:it6505_read] *ERROR* read failed reg[0xd] err: -6 [ 10.787290] it6505 3-005c: [drm:it6505_read] *ERROR* read failed reg[0xd] err: -6 [ 10.788212] wlan0: associated [ 10.788270] it6505 3-005c: [drm:it6505_read] *ERROR* read failed reg[0xd] err: -6 [ 10.789914] it6505 3-005c: [drm:it6505_read] *ERROR* read failed reg[0xd] err: -6 [ 10.790829] it6505 3-005c: [drm:it6505_read] *ERROR* read failed reg[0xd] err: -6 [ 10.792203] it6505 3-005c: [drm:it6505_read] *ERROR* read failed reg[0xd] err: -6 [ 10.793539] it6505 3-005c: [drm:it6505_read] *ERROR* read failed reg[0xd] err: -6 [ 10.794892] it6505 3-005c: [drm:it6505_read] *ERROR* read failed reg[0xd] err: -6 [ 10.795897] it6505 3-005c: [drm:it6505_read] *ERROR* read failed reg[0xd] err: -6 [ 10.796802] it6505 3-005c: [drm:it6505_read] *ERROR* read failed reg[0xd] err: -6 [ 10.797695] it6505 3-005c: [drm:it6505_read] *ERROR* read failed reg[0xd] err: -6 [ 10.798587] it6505 3-005c: [drm:it6505_read] *ERROR* read failed reg[0xd] err: -6 [ 10.799488] it6505 3-005c: [drm:it6505_read] *ERROR* read failed reg[0xd] err: -6 [ 10.800393] it6505 3-005c: [drm:it6505_read] *ERROR* read failed reg[0xd] err: -6 [ 10.801688] it6505 3-005c: [drm:it6505_read] *ERROR* read failed reg[0xd] err: -6 [ 10.802627] it6505 3-005c: [drm:it6505_read] *ERROR* read failed reg[0xd] err: -6 [ 10.804332] it6505 3-005c: [drm:it6505_read] *ERROR* read failed reg[0xd] err: -6 [ 10.805231] it6505 3-005c: [drm:it6505_read] *ERROR* read failed reg[0xd] err: -6 [ 10.806123] it6505 3-005c: [drm:it6505_read] *ERROR* read failed reg[0xd] err: -6 [ 10.806982] it6505 3-005c: [drm:it6505_read] *ERROR* read failed reg[0xd] err: -6 [ 10.807868] it6505 3-005c: [drm:it6505_read] *ERROR* read failed reg[0xd] err: -6 [ 10.808867] udevd[4326]: Process '/usr/sbin/crda' failed with exit code 255. [ 10.818619] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 10.820818] wlan0: dropped frame to 88:71:b1:81:93:1b (unauthorized port) [ 10.831010] wlan0: Limiting TX power to 30 (30 - 0) dBm as advertised by 88:71:b1:81:93:1b [ 10.897844] 8021q: 802.1Q VLAN Support v1.8 [ 11.005561] init: ml-service (mojo_service) post-start process (4399) terminated with status 2 [ 11.782489] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready [ 11.965504] IPv6: ADDRCONF(NETDEV_CHANGE): arc_ns1: link becomes ready [ 11.965953] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready [ 13.318628] device-mapper: verity: sha256 using implementation "sha256-ce" [ 13.408812] device-mapper: verity: sha256 using implementation "sha256-ce" [ 20.016535] init: bootlockboxd post-start process (1517) terminated with status 1 [ 30.678511] vaux18: disabling [ 30.678631] vio28: disabling [ 41.426485] WARNING! power/level is deprecated; use power/control instead [ 60.453051] mtk-mdp3 14001000.mdp3_rdma0: [0] type:10 [ 60.453074] mtk-mdp3 14001000.mdp3_rdma0: [0] type:10, frame:32x32 [ 60.453080] mtk-mdp3 14001000.mdp3_rdma0: [0] type:9 [ 60.453087] mtk-mdp3 14001000.mdp3_rdma0: [0] type:9, frame:32x32 [ 62.406947] PDLOG 2023/08/17 07:26:33.851 P0 Disconnected [ 70.712165] gpio gpiochip0: Persistence not supported for GPIO 150 [ 70.712183] gpio gpiochip0: registered chardev handle for line 150 [ 70.712196] gpio gpiochip0: registered chardev handle for 1 lines [ 86.374305] fscrypt: AES-256-XTS using implementation "xts-aes-ce" [ 88.884928] NET: Registered protocol family 40 [ 89.031321] Bluetooth: set_quality_report_func() quality report not supported [ 92.509057] tun: Universal TUN/TAP device driver, 1.6 [ 92.607020] arcbr0: port 1(vmtap0) entered blocking state [ 92.607038] arcbr0: port 1(vmtap0) entered disabled state [ 92.607224] device vmtap0 entered promiscuous mode [ 92.731473] arc_wlan0: port 1(vmtap3) entered blocking state [ 92.731490] arc_wlan0: port 1(vmtap3) entered disabled state [ 92.731706] device vmtap3 entered promiscuous mode [ 92.731794] arc_wlan0: port 1(vmtap3) entered blocking state [ 92.731801] arc_wlan0: port 1(vmtap3) entered forwarding state [ 92.759195] arcbr0: port 1(vmtap0) entered blocking state [ 92.759244] arcbr0: port 1(vmtap0) entered forwarding state [ 92.837643] IPv6: ADDRCONF(NETDEV_CHANGE): veth2: link becomes ready [ 93.085095] memfd_create() without MFD_EXEC nor MFD_NOEXEC_SEAL, pid=6027 'crosvm' [ 96.220182] hrtimer: interrupt took 9081 ns [ 144.607419] usb 1-1.2: new high-speed USB device number 4 using xhci-mtk [ 144.686593] usb 1-1.2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=72.40 [ 144.686633] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 144.686639] usb 1-1.2: Product: USB2.1 Hub [ 144.686644] usb 1-1.2: Manufacturer: GenesysLogic [ 144.688018] hub 1-1.2:1.0: USB hub found [ 144.688276] hub 1-1.2:1.0: 3 ports detected [ 144.941628] cros-ec-typec 11012000.spi:cros-ec@0:typec: No valid DP mode provided. [ 144.941647] cros-ec-typec 11012000.spi:cros-ec@0:typec: Configure muxes failed, err = -22 [ 144.995181] usb 1-1.2.1: new high-speed USB device number 5 using xhci-mtk [ 145.097772] usb 1-1.2.1: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00 [ 145.097797] usb 1-1.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=6 [ 145.097803] usb 1-1.2.1: Product: USB 10/100/1000 LAN [ 145.097809] usb 1-1.2.1: Manufacturer: Realtek [ 145.097814] usb 1-1.2.1: SerialNumber: 0043D6000000 [ 145.245065] usbcore: registered new interface driver r8152 [ 145.253228] usbcore: registered new interface driver cdc_ether [ 145.335180] usb 1-1.2.1: reset high-speed USB device number 5 using xhci-mtk [ 145.466391] r8152 1-1.2.1:1.0: load rtl8153a-3 v2 02/07/20 successfully [ 145.492577] r8152 1-1.2.1:1.0 eth0: v1.12.11 [ 145.638857] usb 1-1.2.3: new full-speed USB device number 6 using xhci-mtk [ 145.745322] usb 1-1.2.3: New USB device found, idVendor=0835, idProduct=2a01, bcdDevice= 2.05 [ 145.745347] usb 1-1.2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 145.745354] usb 1-1.2.3: Product: BILLBOARD DEVICE [ 145.745360] usb 1-1.2.3: Manufacturer: BILLBOARD CLASS [ 145.745365] usb 1-1.2.3: SerialNumber: 3E7CA2000000000065D9595200000000 [ 146.142815] arc_eth0: port 1(vmtap1) entered blocking state [ 146.142833] arc_eth0: port 1(vmtap1) entered disabled state [ 146.143097] device vmtap1 entered promiscuous mode [ 146.143203] arc_eth0: port 1(vmtap1) entered blocking state [ 146.143210] arc_eth0: port 1(vmtap1) entered forwarding state [ 146.259082] IPv6: ADDRCONF(NETDEV_CHANGE): veth3: link becomes ready [ 147.555032] mediatek-dpi 14015000.dpi: input format 0x100a, output format 0x0001 [ 147.574043] mediatek-dpi 14015000.dpi: input format 0x100a, output format 0x0001 [ 177.042054] mt8183-audio 11220000.audio-controller:mt8183-afe-pcm: mtk_dai_i2s_set_sysclk(), freq 6144000 [ 177.042110] mt8183-audio 11220000.audio-controller:mt8183-afe-pcm: mtk_dai_i2s_config(), id 15, rate 48000, format 10 [ 177.042126] mt8183-audio 11220000.audio-controller:mt8183-afe-pcm: mtk_dai_i2s_config(), id 14, rate 48000, format 10 [ 177.043434] mt8183-audio 11220000.audio-controller:mt8183-afe-pcm: mtk_apll_event(), name APLL2, event 0x1 [ 177.043513] mt8183-audio 11220000.audio-controller:mt8183-afe-pcm: mtk_mclk_en_event(), name I2S2_MCLK_EN, event 0x1 [ 177.043582] mt8183-audio 11220000.audio-controller:mt8183-afe-pcm: mtk_mclk_en_event(), name I2S3_MCLK_EN, event 0x1 [ 197.038494] mt8183-audio 11220000.audio-controller:mt8183-afe-pcm: mtk_mclk_en_event(), name I2S2_MCLK_EN, event 0x8 [ 197.038532] mt8183-audio 11220000.audio-controller:mt8183-afe-pcm: mtk_mclk_en_event(), name I2S3_MCLK_EN, event 0x8 [ 197.038544] mt8183-audio 11220000.audio-controller:mt8183-afe-pcm: mtk_apll_event(), name APLL2, event 0x8 [ 438.558308] perf: interrupt took too long (2641 > 2500), lowering kernel.perf_event_max_sample_rate to 75000 [ 438.577409] perf: interrupt took too long (3331 > 3301), lowering kernel.perf_event_max_sample_rate to 60000 [ 438.603770] perf: interrupt took too long (4170 > 4163), lowering kernel.perf_event_max_sample_rate to 47000 [ 438.637863] perf: interrupt took too long (5342 > 5212), lowering kernel.perf_event_max_sample_rate to 37000 [ 438.699257] perf: interrupt took too long (6710 > 6677), lowering kernel.perf_event_max_sample_rate to 29000 [ 438.804733] perf: interrupt took too long (8395 > 8387), lowering kernel.perf_event_max_sample_rate to 23000 [ 439.021645] perf: interrupt took too long (10519 > 10493), lowering kernel.perf_event_max_sample_rate to 19000 [ 439.482343] perf: interrupt took too long (13222 > 13148), lowering kernel.perf_event_max_sample_rate to 15000 [ 448.076664] SELinux: Context u:object_r:perfprofd_data_file:s0 is not valid (left unmapped). [ 516.544148] init: cupsd main process ended, respawning [ 671.520193] usb 1-1.2: USB disconnect, device number 4 [ 671.520223] usb 1-1.2.1: USB disconnect, device number 5 [ 671.520567] r8152 1-1.2.1:1.0 eth0: Stop submitting intr, status -108 [ 671.543666] usb 1-1.2.3: USB disconnect, device number 6 [ 671.690464] arc_eth0: port 1(vmtap1) entered disabled state [ 671.692251] device vmtap1 left promiscuous mode [ 671.692334] arc_eth0: port 1(vmtap1) entered disabled state [ 676.676049] it6505 3-005c: [drm:it6505_read] *ERROR* read failed reg[0xd] err: -6 [ 676.676964] it6505 3-005c: [drm:it6505_read] *ERROR* read failed reg[0xd] err: -6 [ 676.677862] it6505 3-005c: [drm:it6505_read] *ERROR* read failed reg[0xd] err: -6 [ 676.678741] it6505 3-005c: [drm:it6505_read] *ERROR* read failed reg[0xd] err: -6 [ 676.679543] it6505 3-005c: [drm:it6505_read] *ERROR* read failed reg[0xd] err: -6 [ 676.680481] it6505 3-005c: [drm:it6505_read] *ERROR* read failed reg[0xd] err: -6 [ 676.681361] it6505 3-005c: [drm:it6505_read] *ERROR* read failed reg[0xd] err: -6 [ 676.682223] it6505 3-005c: [drm:it6505_read] *ERROR* read failed reg[0xd] err: -6 [ 676.683100] it6505 3-005c: [drm:it6505_read] *ERROR* read failed reg[0xd] err: -6 [ 676.684027] it6505 3-005c: [drm:it6505_read] *ERROR* read failed reg[0xd] err: -6 [ 676.684930] it6505 3-005c: [drm:it6505_read] *ERROR* read failed reg[0xd] err: -6 [ 676.685828] it6505 3-005c: [drm:it6505_read] *ERROR* read failed reg[0xd] err: -6 [ 676.686723] it6505 3-005c: [drm:it6505_read] *ERROR* read failed reg[0xd] err: -6 [ 676.687554] it6505 3-005c: [drm:it6505_read] *ERROR* read failed reg[0xd] err: -6 [ 676.688471] it6505 3-005c: [drm:it6505_read] *ERROR* read failed reg[0xd] err: -6 [ 676.689385] it6505 3-005c: [drm:it6505_read] *ERROR* read failed reg[0xd] err: -6 [ 676.690292] it6505 3-005c: [drm:it6505_read] *ERROR* read failed reg[0xd] err: -6 [ 676.691174] it6505 3-005c: [drm:it6505_read] *ERROR* read failed reg[0xd] err: -6 [ 676.692049] it6505 3-005c: [drm:it6505_read] *ERROR* read failed reg[0xd] err: -6 [ 676.692927] it6505 3-005c: [drm:it6505_read] *ERROR* read failed reg[0xd] err: -6 [ 676.693821] it6505 3-005c: [drm:it6505_read] *ERROR* read failed reg[0xd] err: -6 [ 676.694701] it6505 3-005c: [drm:it6505_read] *ERROR* read failed reg[0xd] err: -6 [ 676.695541] it6505 3-005c: [drm:it6505_read] *ERROR* read failed reg[0xd] err: -6 [ 676.696421] it6505 3-005c: [drm:it6505_read] *ERROR* read failed reg[0xd] err: -6 [ 676.697304] it6505 3-005c: [drm:it6505_read] *ERROR* read failed reg[0xd] err: -6 [ 676.698186] it6505 3-005c: [drm:it6505_read] *ERROR* read failed reg[0xd] err: -6 [ 676.699079] it6505 3-005c: [drm:it6505_read] *ERROR* read failed reg[0xd] err: -6 [ 676.699972] it6505 3-005c: [drm:it6505_read] *ERROR* read failed reg[0xd] err: -6 [ 676.700881] it6505 3-005c: [drm:it6505_read] *ERROR* read failed reg[0xd] err: -6 [ 676.701775] it6505 3-005c: [drm:it6505_read] *ERROR* read failed reg[0xd] err: -6 [ 676.702681] it6505 3-005c: [drm:it6505_read] *ERROR* read failed reg[0xd] err: -6 [ 676.703552] it6505 3-005c: [drm:it6505_read] *ERROR* read failed reg[0xd] err: -6 [ 691.133117] usb 1-1.2: new high-speed USB device number 7 using xhci-mtk [ 691.210565] cros-ec-typec 11012000.spi:cros-ec@0:typec: No valid DP mode provided. [ 691.210584] cros-ec-typec 11012000.spi:cros-ec@0:typec: Configure muxes failed, err = -22 [ 691.211362] usb 1-1.2: New USB device found, idVendor=2109, idProduct=2820, bcdDevice=30.03 [ 691.211377] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 691.211385] usb 1-1.2: Product: USB2.0 Hub [ 691.211392] usb 1-1.2: Manufacturer: VIA Labs, Inc. [ 691.214836] hub 1-1.2:1.0: USB hub found [ 691.215478] hub 1-1.2:1.0: 5 ports detected [ 691.923344] usb 1-1.2.1: new full-speed USB device number 8 using xhci-mtk [ 692.068543] usb 1-1.2.1: New USB device found, idVendor=06c4, idProduct=c412, bcdDevice= 0.06 [ 692.068593] usb 1-1.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 692.068608] usb 1-1.2.1: Product: DELL DA300 [ 692.068620] usb 1-1.2.1: Manufacturer: Bizlink [ 692.068632] usb 1-1.2.1: SerialNumber: MCU Ver0006 [ 692.080204] hid-generic 0003:06C4:C412.0004: hiddev96,hidraw3: USB HID v1.11 Device [Bizlink DELL DA300] on usb-11200000.xhci-1.2.1/input0 [ 692.208702] usb 1-1.2.2: new high-speed USB device number 9 using xhci-mtk [ 692.347304] usb 1-1.2.2: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=31.00 [ 692.347343] usb 1-1.2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=6 [ 692.347358] usb 1-1.2.2: Product: USB 10/100/1000 LAN [ 692.347371] usb 1-1.2.2: Manufacturer: Realtek [ 692.347382] usb 1-1.2.2: SerialNumber: 001000001 [ 692.482015] usb 1-1.2.2: reset high-speed USB device number 9 using xhci-mtk [ 692.646185] r8152 1-1.2.2:1.0: load rtl8153b-2 v1 10/23/19 successfully [ 692.674648] r8152 1-1.2.2:1.0 eth0: v1.12.11 [ 692.984638] arc_eth0: port 1(vmtap1) entered blocking state [ 692.984671] arc_eth0: port 1(vmtap1) entered disabled state [ 692.985624] device vmtap1 entered promiscuous mode [ 692.986324] arc_eth0: port 1(vmtap1) entered blocking state [ 692.986344] arc_eth0: port 1(vmtap1) entered forwarding state [ 693.087740] IPv6: ADDRCONF(NETDEV_CHANGE): veth4: link becomes ready [ 693.849411] mediatek-dpi 14015000.dpi: input format 0x100a, output format 0x0001 [ 693.875517] mediatek-dpi 14015000.dpi: input format 0x100a, output format 0x0001 [ 727.384385] init: cupsd main process ended, respawning [ 749.236423] mt8183-audio 11220000.audio-controller:mt8183-afe-pcm: mtk_dai_i2s_set_sysclk(), freq 6144000 [ 749.236463] mt8183-audio 11220000.audio-controller:mt8183-afe-pcm: mtk_dai_i2s_config(), id 15, rate 48000, format 10 [ 749.236476] mt8183-audio 11220000.audio-controller:mt8183-afe-pcm: mtk_dai_i2s_config(), id 14, rate 48000, format 10 [ 749.237170] mt8183-audio 11220000.audio-controller:mt8183-afe-pcm: mtk_apll_event(), name APLL2, event 0x1 [ 749.237265] mt8183-audio 11220000.audio-controller:mt8183-afe-pcm: mtk_mclk_en_event(), name I2S2_MCLK_EN, event 0x1 [ 749.237282] mt8183-audio 11220000.audio-controller:mt8183-afe-pcm: mtk_mclk_en_event(), name I2S3_MCLK_EN, event 0x1 [ 762.233278] mt8183-audio 11220000.audio-controller:mt8183-afe-pcm: mtk_mclk_en_event(), name I2S2_MCLK_EN, event 0x8 [ 762.233333] mt8183-audio 11220000.audio-controller:mt8183-afe-pcm: mtk_mclk_en_event(), name I2S3_MCLK_EN, event 0x8 [ 762.233356] mt8183-audio 11220000.audio-controller:mt8183-afe-pcm: mtk_apll_event(), name APLL2, event 0x8