Fixed
Status Update
No update yet.
Comments
vi...@google.com
We’ve shared this with our product and engineering teams and will continue to provide updates as more information becomes available.
ag...@google.com
Please provide the following information to proceed further :
Please try with a Qi certified wireless charger and let us know if it is still with the same issue.
Or is this issue happened right after a phone build update?
Please try with a Qi certified wireless charger and let us know if it is still with the same issue.
Or is this issue happened right after a phone build update?
ar...@google.com
works fine with my P6 and the Samsung's EP-N3300 wireless charger
da...@google.com
Happened right after the December update with the many changes to wireless charging, so my guess is it is related to one of those changes:
Battery & Power
Additional improvements for battery charging information shown in notification shade *[4].
General improvements for battery & thermal performance in certain conditions *[7].
General improvements for wireless charging in certain conditions *[5].
Improvements for alignment detection on Pixel Stand in certain conditions *[5].
Fix for issues occasionally causing incorrect Battery usage accounting to display in Settings *[7].
Tried another Qi certified charger of a co-worker (dont know the model), but behaviout was exactly the same: wireless charging turning off and on again every few seconds and therefore not charging at all.
Battery & Power
Additional improvements for battery charging information shown in notification shade *[4].
General improvements for battery & thermal performance in certain conditions *[7].
General improvements for wireless charging in certain conditions *[5].
Improvements for alignment detection on Pixel Stand in certain conditions *[5].
Fix for issues occasionally causing incorrect Battery usage accounting to display in Settings *[7].
Tried another Qi certified charger of a co-worker (dont know the model), but behaviout was exactly the same: wireless charging turning off and on again every few seconds and therefore not charging at all.
en...@google.com
After receiving the QPR 3 Beta 1 update my phone will no longer charge on either of my wireless chargers which are both QI certified.
ar...@google.com
Android bug report (to be captured after reproducing the issue )
For steps to capture a bug report, please refer:
Alternate method
Navigate to “Developer options”, ensure “USB debugging” is enabled, then enable “Bug report shortcut”. Capture bug report by holding the power
Note: Please upload the files to google drive and share the folder to android-bugreport@google.com, then share the link here.
en...@google.com
I've never had this issue. i have a nanami wireless. I set it down on top of it and move it till i see the blue light come on and walk away. I also have a full leather body case which does not present an issue. I have a 2020 Kia Sorrento and it has wireless charging and it also works flawlessly.
en...@google.com
xa...@google.com
Having the same issue with the Pixel 6 Pro & Pixel Stand 2. Google sent me a replacement Pixel Stand 2 (no luck) and then replaced my full price Pixel 6 Pro with a refurbished Pixel 6 Pro (worth about $300 according to Google - nice one Google #Iseewhatyoudidthere).
None of these options fixed the issue. Now I have a phone worth 1/3 of the price I paid for it and still getting the errors: Connected (Not Charging) and the red text Readjust Your Phone for Faster Charging.
No fast charging to be had. Takes hours and hours to get from 0 to 35-40. Seems to speed up after that but still crazy. Most nights, after an 8 hour sleep, my phone is only up to 70% or so.
Really sad.
None of these options fixed the issue. Now I have a phone worth 1/3 of the price I paid for it and still getting the errors: Connected (Not Charging) and the red text Readjust Your Phone for Faster Charging.
No fast charging to be had. Takes hours and hours to get from 0 to 35-40. Seems to speed up after that but still crazy. Most nights, after an 8 hour sleep, my phone is only up to 70% or so.
Really sad.
da...@google.com
ar...@google.com
The problem also exists in SQ1D.220205.004, S2B3.220205.007.A1 is a beta build but I can install it and send a new report.
en...@google.com
Installed the latest beta, same behaviour. When sharing battery or charging on Pixel Stand 2, wireless charging is turning on and off every few seconds.
https://drive.google.com/file/d/11Sa_6_c_SREIZtlh8_AiW7FNkdf_IXGQ/view?usp=sharing
sr...@google.com
Wireless charging was working fine on my Pixel 4 but since last Android 12 update around the 5 of March 2022 (SP2A.220305.012) it stops working on two different recharge station. I have done the following test:
Reboot the Pixel 4 and place it on my wireless recharge station (no recharge)
Remove my case and reboot (no recharge)
Boot in safe mode (no recharge)
Finally, add an external USB C wireless module and back on the wireless recharge station (Charging)
The stations are working fine but for a reason, the internal wireless stop working after the update.
How to test the internal wireless recharging unit?
Reboot the Pixel 4 and place it on my wireless recharge station (no recharge)
Remove my case and reboot (no recharge)
Boot in safe mode (no recharge)
Finally, add an external USB C wireless module and back on the wireless recharge station (Charging)
The stations are working fine but for a reason, the internal wireless stop working after the update.
How to test the internal wireless recharging unit?
ra...@google.com
Same problem here, Pixel 6 bought at launch, used wireless charging since launch, upgraded to a Pixel Stand Gen 2 as a gift from my wife for valentines. Worked great for a month (to the DAY). Woke up today and trying all kinds of "fixes and resets" nothing charges.
en...@google.com
redacted
dg...@google.com
redacted
en...@google.com
I started having this problem with my Pixel 6 Pro (with Pixel Stand 2) a few days ago. Even after March Update & latest Beta it didnt fix the issue. My Stand charge without an issue on my Pixel 4 XL though.
ka...@gmail.com
Another thing I just found out: I borrowed a co-workers QI-Charger and connected the Pixel Stand 2s power supply and another 15W power supply, both times the issue with wireless charging turning off and on again appeared. However, when I connected my co-workers Qi-Charger to my notebook (USB 3.0A port) wireless charging would work continously. So it seems to me, that the issue is with the maximum power the power supply can deliver and ther Pixel having issues with negotiating how much power to use maybe.
zy...@gmail.com
User here, I've owned my Pixel 6 Pro from launch with absolutely zero issues and after the big March update my phone will not wirelessly charge nor will it even battery share (Feature will not turn on) and I'm just shocked that an update would do this.
to...@gmail.com
Pixel 6 Pro, wireless charging has worked for me throughout as far as I know. Only typically use wireless when charging at night when sleeping. Wake up to a full charge at the least. Issue I experience in February and March updates, especially after March update, is the message to realign for better charging. Happens regardless of how many times I take off the dock and reposition. Used to have a margin of error without issue. Requires removing for period of time and then attempting again. Sometimes needing to be done multiple times. Or ignore it like I usually resort to.
dg...@google.com
I am also experiencing intermittent issues with wireless charging on my Pixel 6 Pro on a Gen 1 Pixel Stand. Overnight charging seems fine, as my phone is at 100% when my alarm goes off, but when placed on the stand during the day, the phone will often indicate “Not Charging.” Picking up and immediately re-placing the phone on the stand does not remedy the issue. I am currently charging via the USB-C wired connection due to wireless not working.
ja...@specialized.com
Pixel 6 wireless charging while phone powered up still not working after the March update. Wireless charging does work when phone is powered off, though.
da...@google.com
I was told by Google to take my phone to ubreakifix to repair. I live in a big socal city with 8+ locations and called every single one within 50 miles of me and same story. They cannot order the part to repair the wireless charging, I guess the next step is to send it to google to fix. Mine won't wireless charge off anything (2 pixel gen 1 stands, 1 pixel stand gen 2 (valentines gift), off brand wireless charger and a anker battery pack with a wireless charger on top. It blinks like it is charging and shuts off immediately. Not even on long enough to sync it and setup the google pixel stand software.
I had perfect charging off my pixel gen 2 stand for exactly one month and all wireless charging died on march 14th. Phone is in flawless shape, never dropped, no cracks or dings, use a google case but no difference without a case. I was holding out on the March update to fix my problems but it did nothing.
I bought 3 pixel 6's for my family and mine is the only one with this problem. Really frustrated and would love to get this resolved. Will contact support tomorrow but hoping the turn around is fast as I can't be without my phone for work/life purposes.
I had perfect charging off my pixel gen 2 stand for exactly one month and all wireless charging died on march 14th. Phone is in flawless shape, never dropped, no cracks or dings, use a google case but no difference without a case. I was holding out on the March update to fix my problems but it did nothing.
I bought 3 pixel 6's for my family and mine is the only one with this problem. Really frustrated and would love to get this resolved. Will contact support tomorrow but hoping the turn around is fast as I can't be without my phone for work/life purposes.
[Deleted User] <[Deleted User]>
Since performing the new March update, I have noticed that my PIxel 6 Pro is not fully charging overnight using wireless adaptive charging. Further, the phone is getting quite hot from the charging (more than I have noticed before). The charge is only getting the battery up to 70-75% by the time my alarm goes off. Please address this issue.
da...@google.com
Since March update it starts to wirelessly charge then stop
dg...@google.com
+1 since the March update. My P6PRO gets extremely hot on my Pixel Stand, charges ~10% per hour at most. Took it off the Pixel stand yesterday after it was on for several hours and it was not even charging and extremely hot. Just sent a feedback after removing it from the Pixel Stand and it was extremely hot and had only gained 10-20% after nearly 2 hours. This has never been the case. I've owned this P6P since launch and been using my Pixel stand to charge it with very little issues the whole time. Usually will charge 40%+ in an hour. I haven't honestly paid close attention but definitely noticing some very alarming things after the already delayed March update
dg...@google.com
+1 got this issue
The Pixel 6 used to charge normally on my older Samsung wireless charger and now it doesn't do anything (rebooting doesn't help either)
On the Pixel stand it's more of a coin flip if it works or not but it seems more to drain the battery than charge it.
The Pixel 6 used to charge normally on my older Samsung wireless charger and now it doesn't do anything (rebooting doesn't help either)
On the Pixel stand it's more of a coin flip if it works or not but it seems more to drain the battery than charge it.
dg...@google.com
dg...@google.com
deleted
ja...@specialized.com
P6 Pro wireless charging not working in 2022 BMW m440i at all
ra...@google.com
Pixel 6 user here. Wireless charging on Pixel Stand 2nd gen has stopped working since yesterday.
um...@gmail.com
Pixel 6 pro user here. Wireless charging has never worked on my device. I have both a brand new pixel stand 2 and another QI certified 10w charger.
When I put it on either charger. It recognise it and then drop in and out after 10seconds. It then stay connected but doesn't charge and just get extremely hot.
I have been back and forth with Google since December and just get told to wait for the next update.
When I put it on either charger. It recognise it and then drop in and out after 10seconds. It then stay connected but doesn't charge and just get extremely hot.
I have been back and forth with Google since December and just get told to wait for the next update.
dg...@google.com
je...@google.com
Android bug report (to be captured after reproducing the issue)
For steps to capture a bug report, please refer:
Alternate method
Navigate to “Developer options”, ensure “USB debugging” is enabled, then enable “Bug report shortcut”. Capture bug report by holding the power button and selecting the “Take bug report” option.
Note: Please upload the files to google drive and share the folder to android-bugreport@google.com, then share the link here.
dp...@gmail.com
Also, bug report should be taken while on the charger if possible. Knowing the type of charger (brand, model) that you have been using or tried would be very helpful too.
kh...@gmail.com
Same problem on my Pixel 6 Pro. Details are:
1. Wireless charging worked normally until installation QPR3 update (now on QPR3 1.1, no improvement.) Current build is S3B1.220218.006
2. Problem has been verified with both a Pixel Stand 2 and a Belkin Qi charger (Belkin charger is marked as Google compatible.) There are no issues with wired charging.
3. On occasion the phone will charge wirelessly for a short period of time, then stop. At other times the phone will not charge at all. I have been unable to determine why wireless charging works on rare occasions, nor have I determined how to jog the unit to a working state.
4. In all cases the phone indicates that it is connected to a charger, and the charger indicates a phone is present. The charger and phone get warm but no charge current is flowing.
5. Restarting or power-cycling the phone does not cure the problem, nor does clearing the Pixel Stand 2 app cache or re-installing the app.
6. Note: Google CS has offered to RMA the charging stand and/or phone but since the problem exists with multiple charging stands and began with a specfic firmware update then it is obvioulsy unlikely to be a hardware issue. CS should be made aware of this issue so as to avoid unecessary RMAs for users reporting this problem.
1. Wireless charging worked normally until installation QPR3 update (now on QPR3 1.1, no improvement.) Current build is S3B1.220218.006
2. Problem has been verified with both a Pixel Stand 2 and a Belkin Qi charger (Belkin charger is marked as Google compatible.) There are no issues with wired charging.
3. On occasion the phone will charge wirelessly for a short period of time, then stop. At other times the phone will not charge at all. I have been unable to determine why wireless charging works on rare occasions, nor have I determined how to jog the unit to a working state.
4. In all cases the phone indicates that it is connected to a charger, and the charger indicates a phone is present. The charger and phone get warm but no charge current is flowing.
5. Restarting or power-cycling the phone does not cure the problem, nor does clearing the Pixel Stand 2 app cache or re-installing the app.
6. Note: Google CS has offered to RMA the charging stand and/or phone but since the problem exists with multiple charging stands and began with a specfic firmware update then it is obvioulsy unlikely to be a hardware issue. CS should be made aware of this issue so as to avoid unecessary RMAs for users reporting this problem.
js...@gmail.com
deleted
en...@google.com
My Pixel 6 Pro stopped charging wirelessly via the Pixel Stand 2 yesterday.
co...@zuricate.net
After the March Update and a restart of my Pixel 6 Pro, yesterday it stopped the wireless charging on my Belkin BoostCharge (with two pads), which worked for months before. It just says "connected, not charging".
je...@google.com
deleted
um...@gmail.com
Plagued by this issue on a name brand Samsung Qi charger and a no-name Qi charger which both work flawlessly with other phones. I have a Pixel 6 Pro and my wife has a Pixel 6. Both exhibit the same issue.
js...@gmail.com
Precisely the same issue as those noted above. Phone constantly (without case) states (on Pixel Stand 2) to realign device for faster charging (red text in ambient mode). The phone then goes to 'Connected, Not Charging' and continues to drain battery. Sometimes, if I place the phone left of centre, it says charging but gives exhorbitant ETAs til 100% - like 14 hours, etc. Other times, if I'm lucky, the adaptive charging kicks in and the phone says it will be full by 'alarm time'. However, 95% of the time, the phone ends up at 60-75% by alarm time (6-8 hours later).
I had my brand new $899 Pixel 6 Pro replaced with a refurbished Pixel 6 Pro valued at $363.00 (yes, seriously; this is actually direct from Google's admission also). So I've already lost $536.00 on this and no change in phone behaviour.
I had my brand new $899 Pixel 6 Pro replaced with a refurbished Pixel 6 Pro valued at $363.00 (yes, seriously; this is actually direct from Google's admission also). So I've already lost $536.00 on this and no change in phone behaviour.
um...@gmail.com
For us to further investigate this issue, please grant permission to access the gdrive link provided in
Note: Please upload the files to google drive and share the folder to android-bugreport@google.com, then share the link here.
js...@gmail.com
Still occurring after the April update. Not sure if your Pixel Stand 2 was included in the 'certain devices'.thats what I use.
[Deleted User] <[Deleted User]>
Update: The April update completed broke what little Pixel Stand 2 wireless charging worked. I've spent almost an hour trying to get the phone to actually saying something other than Connected, Not Charging. This is incredibly bad.
Realign phone for faster charging is constantly displayed and the old positions I had found not constantly connect and disconnect.
Realign phone for faster charging is constantly displayed and the old positions I had found not constantly connect and disconnect.
je...@google.com
April update has not changed anything for me. Charging works for a short while then just stops and it might start again a while later. Worse the higher the battery percentage. Phone gets hot. Issues on belkin wireless charger, Anker wireless charger and Tesla model 3 charger. Why hasn't this been fixed!
mu...@gmail.com
It's working well for me after April system update.
I'm using an Anker Wireless PowerWave Charging Pad - 10Whttps://www.amazon.de/dp/B07THHQMHM/ref=cm_sw_r_apan_i_dl_FMKXZ251P290YGC7PKWG?_encoding=UTF8&psc=1 and also the charger of my Ford Focus 2020.
I will follow it during the next days and inform you in case the issues comes back. Since I've bought the phone 1 month ago it never worked as expected as now (February, March system updates).
I'm using an Anker Wireless PowerWave Charging Pad - 10W
I will follow it during the next days and inform you in case the issues comes back. Since I've bought the phone 1 month ago it never worked as expected as now (February, March system updates).
mu...@gmail.com
For curiosity here are my battery charging logs since I updated to April System update. All of them were done using the Anker except the last one that was with my car.
wa...@gmail.com
an...@google.com
In this video is shown what actually happens. When the charging current approaches to 1000 mA, it switches of charging and then restarts.
https://photos.app.goo.gl/svFt3vAEXSik6WbSA
an...@google.com
Thank you for reporting this issue.
Android bug report (to be captured after reproducing the issue)
For steps to capture a bug report, please refer:https://developer.android.com/studio/debug/bug-report#bugreportdevice
Alternate method
Navigate to “Developer options”, ensure “USB debugging” is enabled, then enable “Bug report shortcut”. Capture bug report by holding the power button and selecting the “Take bug report” option.
Also, please perform the following power off test and share your feedback.
Please turn off the device (power off) around 50% and place it on the wireless charger for about 15 minutes. The phone should boot to charger mode (it only display the battery level as percentage) and start charging. The user can check the state lightly tapping on the power button (light tap) and verify/validate that the battery level is increasing. A light tap will cause the device display to light up for a short while.
Note: Please upload the files to google drive and share the folder to android-bugreport@google.com, then share the link here.
Android bug report (to be captured after reproducing the issue)
For steps to capture a bug report, please refer:
Alternate method
Navigate to “Developer options”, ensure “USB debugging” is enabled, then enable “Bug report shortcut”. Capture bug report by holding the power button and selecting the “Take bug report” option.
Also, please perform the following power off test and share your feedback.
Please turn off the device (power off) around 50% and place it on the wireless charger for about 15 minutes. The phone should boot to charger mode (it only display the battery level as percentage) and start charging. The user can check the state lightly tapping on the power button (light tap) and verify/validate that the battery level is increasing. A light tap will cause the device display to light up for a short while.
Note: Please upload the files to google drive and share the folder to android-bugreport@google.com, then share the link here.
to...@gmail.com
Previously had zero issues with wireless charging on pixel 6. Since April update my phone will only partially charge. The past 2 days I only got to around 35% on an overnight charge. Third party charging stand.
zy...@gmail.com
Wireless charging problem persists on P6 Pro after QPR3 1.2 update today (S3B1.220318.003). Symptoms are the same: sometimes phone will not charge wirelessly and at other time it will charge wirelessly for some random period of time, then stop. Occurs with both Pixel Stand 2 and other wireless charging stands.
mi...@google.com
Since April update my Pixel 6 Pro now loses charge overnight when on the Pixel Stand Gen 2, even after lining up properly and removing a case. I had no issues for the past 3 months, and have no issues with other brand chargers.
zy...@gmail.com
Some problem for me. Pixel 6 Pro charging with a Pixel Stand 2. The phone just gets warm and alternates between Charging Wirelessly, Connected Not Charging, and Not Charging.
zy...@gmail.com
Some problem for me. Pixel 6 Pro charging with a Pixel Stand 2. The phone just gets warm and alternates between Charging Wirelessly, Connected Not Charging, and Not Charging.
xa...@google.com
mi...@google.com
My Pixel 6 wireless charger stopped working in March and having read about the known issue and ongoing investigations I have just waited patiently. Since the latest updates haven't revolved the issue, should I seek a refund, or is the issue close to being resolved?
mi...@google.com
I've noticed my P6 Pro would stop charging once the device temperature has reach 40°C or more. After it cools down a bit it would go back charging.
This happens regardless of wirelessly charging or plugged in. Though I have notice by plugging it in, sometimes it doesn't care about the temperature and will just charge at a slow speed.
This happens regardless of wirelessly charging or plugged in. Though I have notice by plugging it in, sometimes it doesn't care about the temperature and will just charge at a slow speed.
an...@google.com
For us to further investigate this issue, Please perform the power off test and share the bugreport (as mentioned in
he...@gmail.com
Wireless charging stopped working on Belkin Charger, continues to work on a different charger. Belkin has no problem charging other wireless devices. Works intermittently. No relation to heat apparently. Have restarted phone but still doesn't work.
bu...@gmail.com
I emailed my bug report and then did the power off test as advised, but my Pixel 6 Pro continues to say it is charging wirelessly on the Pixel Stand 2, but without actually charging, or charging at an extremely slow rate.
[Deleted User] <[Deleted User]>
deleted
sr...@google.com
I have noticed that when wireless charging halts it seems to be associated with either user interaction with the phone while on the stand, or even if the phone was idle but a notification arrived. If I place the phone in airplane mode (to prevent any notification activity) and leave the phone completely untouched during the charging process then charging will complete without interruption. It appears that wake activity (including notifications) can cause an interruption to charging, but with the phone as idle as possible and in airplane mode then no charging interruptions seem to occur.
In testing thus far my track record is that with any user or notification activity charging drop-out will occur virtually 100% of the time, and with the phone in airplane mode it has never occurred, so the behavior seems to be consistent. Testing was with a Pixel Stand 2.
In testing thus far my track record is that with any user or notification activity charging drop-out will occur virtually 100% of the time, and with the phone in airplane mode it has never occurred, so the behavior seems to be consistent. Testing was with a Pixel Stand 2.
dg...@google.com
deleted
ta...@gmail.com
I have had wireless charging issues in my car. I have a namami and yootech wireless charger at home. The phone charges with those no issues. However the wireless charger in my Hyundai Elantra and Hyundai ionic phev will only work if my phone is off. Even then it's pretty slow. Charged from 33 to 37% in 20 minutes. When the 0hine is on it doesn't charge but just gets hot. It sometimes will charge for a few minutes and then stop.
ta...@gmail.com
is...@gmail.com
Other affected users who have starred the issue, please perform the following power off test and share your feedback
Please turn off the device (power off) around 50% and place it on the wireless charger for about 15 minutes. The phone should boot to charger mode (it only display the battery level as percentage) and start charging. The user can check the state lightly tapping on the power button (light tap) and verify/validate that the battery level is increasing. A light tap will cause the device display to light up for a short while.
Note: Please upload the files to google drive and share the folder to android-bugreport@google.com, then share the link here.
Please turn off the device (power off) around 50% and place it on the wireless charger for about 15 minutes. The phone should boot to charger mode (it only display the battery level as percentage) and start charging. The user can check the state lightly tapping on the power button (light tap) and verify/validate that the battery level is increasing. A light tap will cause the device display to light up for a short while.
Note: Please upload the files to google drive and share the folder to android-bugreport@google.com, then share the link here.
ba...@gmail.com
I have a pixel 6 pro and I'm using the first gen pixel stand. Up until recently everything worked fine. Now for some reason it seems like when the phone reaches 100% charge, it turns Do Not Disturb off. I have done multiple things to try and fix it but with no luck.
sh...@gmail.com Restricted
Restricted
Comment has been deleted.
ma...@gmail.com
Last beta update broke my wireless charging. I have submitted a bug report. Tried everything including, uninstalling updates to digital wellbeing, clock, etc and even a factory reset. It sometimes works with phone off or safe mode ( maybe one out of 10 times) for at least a short while (haven't left it going more then a minute or two). I have 4 different brand chargers and two other family members who have no issues ( no on beta though). Team is welcome to contact me for additional information if needed to help resolve this.
[Deleted User] <[Deleted User]>
Comment has been deleted.
aa...@gmail.com
I've only started having issues with wireless charging on my Pixel 6 Pro since the 4/5/2022 update. More specifically, there's been a couple nights this past week where it does not completely charge my phone despite sitting on the Google Pixel Stand (1st Gen) all night. It's intermittent so haven't been able to grab a bug report. Today, I've started noticing that whenever I set my phone down (just on my wooden desk, not on a wireless charger), my phone shows "Realign phone for faster charging".
Here's a picture to demonstrate:https://drive.google.com/drive/folders/1REnVn4NCpPXR94YzdH7LIzJm19S-eYyt
Here's a picture to demonstrate:
sh...@gmail.com
My Pixel 6 has the "connected, not charging" issue when in my car connected to a QC 3.0 and 18w adapter.
It has no relation to heat as I have an AC vent blowing directly at it. Same issue with no AC.
It has no relation to heat as I have an AC vent blowing directly at it. Same issue with no AC.
sh...@gmail.com
this issue is occuring for me since at least the december update --- please advise. it is unrelated to heat, nor supplied power. i have swapped wirless chargers in the car 3 times as well as the cable and the base that supplies power. Apparently this is a known issue?
fa...@hotmail.com
should mention i did a full wipe and erase as well, with april update.
Description
Its complaining that some required components can not be found in Build-Tools 28.0.3.
Here is the full error print out:
The error Im getting is:
> A problem occurred starting process 'command '/Users/tobias/Library/Android/sdk/build-tools/28.0.3/i686-linux-android-ld''
Skipped RenderScript support mode compilation for mips : required components not found in Build-Tools 28.0.3
Please check and update your BuildTools.
warning: Linking two modules of different data layouts: '/Users/tobias/Library/Android/sdk/build-tools/28.0.3/renderscript/lib/bc/armeabi-v7a/libclcore.bc' is 'e-m:e-p:32:32-i64:64-v128:64:128-a:0:32-n32-S64' whereas '/Users/tobias/Repositories/app-android/app/build/generated/res/rs/minSdk19Dev/debug/raw/bc32/brightnesscontrastfilter.bc' is 'e-p:32:32-i64:64-v128:64:128-n32-S64'
warning: Linking two modules of different target triples: /Users/tobias/Library/Android/sdk/build-tools/28.0.3/renderscript/lib/bc/armeabi-v7a/libclcore.bc' is 'armv7--linux-android' whereas '/Users/tobias/Repositories/app-android/app/build/generated/res/rs/minSdk19Dev/debug/raw/bc32/brightnesscontrastfilter.bc' is 'armv7-none-linux-gnueabi'
warning: Linking two modules of different data layouts: '/Users/tobias/Library/Android/sdk/build-tools/28.0.3/renderscript/lib/bc/x86/libclcore.bc' is 'e-m:e-p:32:32-i64:64-v128:64:128-a:0:32-n32-S64' whereas '/Users/tobias/Repositories/app-android/app/build/generated/res/rs/minSdk19Dev/debug/raw/bc32/brightnesscontrastfilter.bc' is 'e-p:32:32-i64:64-v128:64:128-n32-S64'
warning: Linking two modules of different target triples: /Users/tobias/Library/Android/sdk/build-tools/28.0.3/renderscript/lib/bc/x86/libclcore.bc' is 'armv7--linux-android' whereas '/Users/tobias/Repositories/app-android/app/build/generated/res/rs/minSdk19Dev/debug/raw/bc32/brightnesscontrastfilter.bc' is 'armv7-none-linux-gnueabi'
> Task :translation:compileDebugJavaWithJavac
Note: /Users/tobias/Repositories/app-android/translation/src/main/java/com/tattoodo/translation/TranslationResources.java uses or overrides a deprecated API.
Note: Recompile with -Xlint:deprecation for details.
Note: /Users/tobias/Repositories/app-android/translation/src/main/java/com/tattoodo/translation/TranslationInterceptor.java uses unchecked or unsafe operations.
Note: Recompile with -Xlint:unchecked for details.
> Task :data:generateDebugRFile
> Task :commons-lang:compileJava
Note: /Users/tobias/Repositories/app-android/commons-lang/src/main/java/tat/org/apache/commons/lang3/ArrayUtils.java uses unchecked or unsafe operations.
Note: Recompile with -Xlint:unchecked for details.
FAILURE: Build failed with an exception.
* What went wrong:
Execution failed for task ':app:compileMinSdk19DevDebugRenderscript'.
> A problem occurred starting process 'command '/Users/tobias/Library/Android/sdk/build-tools/28.0.3/i686-linux-android-ld''
* Try:
Run with --stacktrace option to get the stack trace. Run with --info or --debug option to get more log output. Run with --scan to get full insights.
* Get more help at
BUILD FAILED in 5s