Assigned
Status Update
No update yet.
Comments
cy...@google.com
cy...@google.com
I would greatly appreciate any suggestions you may have regarding this issue. Thank you!
ac...@gmail.com Restricted
Restricted
cy...@google.com
Dear,
The issue still persists.
Currently, both the Check Report State and Query Discrepancy tests are functioning correctly and passing. However, when executing the Request Sync test, the issue remains.
As per your suggestion, I have modified my approach:
I now use the Google Assistant app to add/remove devices.
I use the Google Home app (GHA) for updating devices.
Attached are my operation video and logs for your reference. If there are any errors in my peration process, how should I correctly perform the following test scenarios?
1.Check HomeGraph devices after adding a device => failed (video: adding a device process-20250212.mp4 -https://drive.google.com/open?id=1RSXtlXO2Fqd9liwEIIVDC8gN0GC3CAig )
2.Check HomeGraph devices after removing a device => passed
3.Check HomeGraph devices after updating a device => failed (video: updating a device process-20250212.mp4 -https://drive.google.com/file/d/1aaMd6yUCoRr-lFGfNrDPP8RXvCjVZQPB/view?usp=sharing )
Project ID: zephyr-dev-439505
Sync Response:https://drive.google.com/file/d/19KqcJaeESmuxwL8Y5C5NlacFB2URByN_/view?usp=sharing
GCP logs:https://drive.google.com/file/d/1CstJVr2tnpjv39Uzf5YDSY1VATyNJ7Ls/view?usp=sharing
Test suite : Report State and Request Sync : timeout is currently set to 15 seconds
Thank you.
The issue still persists.
Currently, both the Check Report State and Query Discrepancy tests are functioning correctly and passing. However, when executing the Request Sync test, the issue remains.
As per your suggestion, I have modified my approach:
I now use the Google Assistant app to add/remove devices.
I use the Google Home app (GHA) for updating devices.
Attached are my operation video and logs for your reference. If there are any errors in my peration process, how should I correctly perform the following test scenarios?
1.Check HomeGraph devices after adding a device => failed (video: adding a device process-20250212.mp4 -
2.Check HomeGraph devices after removing a device => passed
3.Check HomeGraph devices after updating a device => failed (video: updating a device process-20250212.mp4 -
Project ID: zephyr-dev-439505
Sync Response:
GCP logs:
Test suite : Report State and Request Sync : timeout is currently set to 15 seconds
Thank you.
ac...@gmail.com
Dear developer,
Thank you for providing the detailed information. Based on the video, it appears that you unlinked and relinked your project in Google Assistant > Home control. However, this is not the correct approach for the Request Sync test cases in the Test Suite.
For the test cases - Check HomeGraph devices after adding / removing / updating a device, you will need to add or remove other smart home devices to your project, such as a LIGHT or AC_UNIT. When updating a device, you can change its name. Kindly ensure that this is done from your third-party app rather than from the Google Home app (GHA). For more details, please refer to this link.
If you have any further questions, please feel free reach out to us. Thanks.
cy...@google.com
Dear ,
Thank you for your response. I would like to provide some clarification regarding our product. It is a smart range hood, and we have developed the Zephyr Connect App: Zephyr Connect on App Store (https://play.google.com/store/apps/details?id=com.gemteks.rangehood&hl=en_US ). When you mention third-party applications, are you referring to using our Zephyr Connect App for operation?
If so, the app was originally designed to allow a single account to be linked to only one smart range hood. When a device is already linked, adding a new device requires unlinking and relinking, which will rebind the originally linked device. The original design also does not support adding additional smart home devices while an existing device is linked.
The app also does not support updating or renaming devices. Therefore, it is not possible to achieve this through a third-party application. Given this limitation, how should we proceed to pass the required test items?
A few years ago, we successfully passed the Request Sync test (https://drive.google.com/file/d/1pKdSsrx66pY2gG-DkSx8pZScuoaJxORV/view?usp=sharing ). At that time, during the Check HomeGraph devices after adding/removing/updating step , we were able to pass the test simply by removing the device through our app.
Based on the above explanation, are we still required to complete the test for adding and updating devices in HomeGraph? If so, how should we implement and proceed with the test if it is completed without using the Google Home application (GHA)?
Thank you
Thank you for your response. I would like to provide some clarification regarding our product. It is a smart range hood, and we have developed the Zephyr Connect App: Zephyr Connect on App Store (
If so, the app was originally designed to allow a single account to be linked to only one smart range hood. When a device is already linked, adding a new device requires unlinking and relinking, which will rebind the originally linked device. The original design also does not support adding additional smart home devices while an existing device is linked.
The app also does not support updating or renaming devices. Therefore, it is not possible to achieve this through a third-party application. Given this limitation, how should we proceed to pass the required test items?
A few years ago, we successfully passed the Request Sync test (
Based on the above explanation, are we still required to complete the test for adding and updating devices in HomeGraph? If so, how should we implement and proceed with the test if it is completed without using the Google Home application (GHA)?
Thank you
Description
I'm Korean and I'm currently creating a Google Home app for boilers. As I do it, I can turn on the heating mode and control the temperature with my voice on Google Assistant. However, heating mode and off mode are available, but Google Assistant voice is not recognized in 'Fan Mode'. Even if I say 'turn on fan mode'(korean) in voice at Google Home, Google Assistant only displays internet search data. 'turn on heating mode, turn up the temperature' and so on are working well. Can I find a solution?
Related videos will be displayed. (iphone15maxpro)
Thank you.