Assigned
Status Update
No update yet.
Comments
cy...@google.com
cy...@google.com
I would greatly appreciate any suggestions you may have regarding this issue. Thank you!
da...@gmail.com
Comment has been deleted.
da...@gmail.com
Dear,
The issue still persists.
Currently, both the Check Report State and Query Discrepancy tests are functioning correctly and passing. However, when executing the Request Sync test, the issue remains.
As per your suggestion, I have modified my approach:
I now use the Google Assistant app to add/remove devices.
I use the Google Home app (GHA) for updating devices.
Attached are my operation video and logs for your reference. If there are any errors in my peration process, how should I correctly perform the following test scenarios?
1.Check HomeGraph devices after adding a device => failed (video: adding a device process-20250212.mp4 -https://drive.google.com/open?id=1RSXtlXO2Fqd9liwEIIVDC8gN0GC3CAig )
2.Check HomeGraph devices after removing a device => passed
3.Check HomeGraph devices after updating a device => failed (video: updating a device process-20250212.mp4 -https://drive.google.com/file/d/1aaMd6yUCoRr-lFGfNrDPP8RXvCjVZQPB/view?usp=sharing )
Project ID: zephyr-dev-439505
Sync Response:https://drive.google.com/file/d/19KqcJaeESmuxwL8Y5C5NlacFB2URByN_/view?usp=sharing
GCP logs:https://drive.google.com/file/d/1CstJVr2tnpjv39Uzf5YDSY1VATyNJ7Ls/view?usp=sharing
Test suite : Report State and Request Sync : timeout is currently set to 15 seconds
Thank you.
The issue still persists.
Currently, both the Check Report State and Query Discrepancy tests are functioning correctly and passing. However, when executing the Request Sync test, the issue remains.
As per your suggestion, I have modified my approach:
I now use the Google Assistant app to add/remove devices.
I use the Google Home app (GHA) for updating devices.
Attached are my operation video and logs for your reference. If there are any errors in my peration process, how should I correctly perform the following test scenarios?
1.Check HomeGraph devices after adding a device => failed (video: adding a device process-20250212.mp4 -
2.Check HomeGraph devices after removing a device => passed
3.Check HomeGraph devices after updating a device => failed (video: updating a device process-20250212.mp4 -
Project ID: zephyr-dev-439505
Sync Response:
GCP logs:
Test suite : Report State and Request Sync : timeout is currently set to 15 seconds
Thank you.
Description
Google Home Scripting API does not support negative values for relative light brightness changes.
e.g. the code below will increase the brightness instead of decrease it: